GB
CONSUMPTION DATA
ProgrammeWaterEnergyProgramme
duration
(l)(kWh)(min.)
Cotton 95° C1802,00120
with pre-wash
Cotton 95° C2701,80110
Cotton 60° C2701,20110
Synthetic 60° C3600,9085PROGRAMME START
1. Plug in the appliance.
2. Turn on the water supply tap.Cotton short 4° C04650,7075
3. Press th?ON/e OFF ? button.Synthetic 40° C600,6075
DOOR LOCKDelicate 40° C5800,6070
Wool 40° C6800,6065The door locks automatically after the programme start until the end of the programme.
PROGRAMME END
SELECTING THE PROGRAMME The programme sequence indicat?oStopr is ?. at
1. Turn the programme selector knob clockwise to the desired programme. 1. Press th?ON/e OFF ? button.
2. Set the temperature knob to the desired temperature.2. Cancel the special options by pressing the appropriate buttons.
3. Turn the water supply tap(s) off.
PRESS THE DESIRED SPECIAL OPTION BUTTON4. Wait for the door to unlock (about 2 minutes).
?Lightly soiled / Half load? button 5. Open the door and unload the machine.
Reduces water consumption, above all during the rinse.Note: Do not fully close the door but leave it ajar to allow the drum to dry out.
Especially suitable for lightly soiled or small loads (reduce the detergent quantity).
?No spin? button PROGRAMME RESELECTION
1. Press th?ON/e OFF ? button.
Press this button to exclude the spin function from the programme.
?Rinse Hold / Spin delay? button 2. Select the new programme, temperature and relative options.
The laundry remains in the last rinse water without being spun, to avoid heavy 3. Press th?ON/e OFF ? button.
creasing.
Especially suitable for the ?Synthetic? or ?Delicate? programmes, if the laundry is not to
be unloaded immediately after the end of the programme.
Stopping ?Rinse Hold?
Press the ?Rinse Hold? button again; the load will be spun according to the selected
programme.
5019 100 00028 |
ACEC
WHIRLPOOL
