Troubleshooting
TROUBLESHOOTING
No sound or bad sound quality.
YPAUSE might be active. Press 2;.
Troubleshooting
Y Loose, wrong or dirty connections. Check and clean connections.
WARNING: Under no circumstances should you try to repair the set yourself asYVolume might not be appropriately adjusted. Adjust the volume.
this will invalidate the warranty. If a fault occurs, first check the points listed,Y Strong magnetic fields. Check playerOs position and connections. Also keep
before taking the unit for repair. If you are unable to solve a problem by followingaway from active mobile phones.
these hints, consult your dealer or service center.Y For in-car use, check that the cassette adapter is inserted correctly, that the car
cassette playerOs playback direction is correct (press autoreverse to change),
The CD player has no power, or playback does not startand that the cigarette lighter jack is clean. Allow time for temperature change.
Y Check that your batteries are not dead or empty, that they are inserted
correctly, that the contact pins are clean.
YYour adapter connection may be loose. Connect it securely.
Y For in-car use, check that the car ignition is on. Also check playerOs batteries.
The indication NO dISC is displayed
Y Check that the CD is clean and correctly inserted (label-side upward).
Y If your lens has steamed up, wait a few minutes for this to clear.
The indication NF dISC is displayed
Y CD-RW (CD-R) was not recorded properly. Use FINALIZE on your CD-recorder.
The indicationHOLD is on and/or there is no reaction to controls
Y If HOLD is activated, then deactivate it.
Y Electrostatic discharge. Disconnect power or remove batteries for a few seconds.
The CD skips tracks
Y The CD is damaged or dirty. Replace or clean the CD.
Yresume, shuffle or program is active. Switch off whichever is on.
CAUTION
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation. |