CD MIX-2
REAR PANEL FEATURES
1. Channels Inputs - Unbalanced RCA jacks for connecting external sources. The Phono/Line Input is selected
with the toggle switch on the front panel. You can connect stereo audio from Turntables, HiFi VCRs,
cassette and reel-to-reel tape decks, DAT machines, CD players, laser discs, tuners, even synthesizers or
other mixing consoles.
NOTE: Plug mono audio sources into both Left and Right inputs using a "Y" cable
connector.
2. GND - Grounding lug for turntable connection. Always use this connection when using turntables. (your
turntable cable should have a grounding wire)
3. Line/Phono Input switcUshe - this to allow either line level or phono level equipment to be plugged into
your channel inputs. When Phono input is s seilecgnatl ised, y foured directly to the high-quality RIAA phono
pre-amplifiers. Use this position only for turntables. Line level sources will overload the sensitive phono pre-
amps and will sound very bad, so always be sure to toggle the line/phono switch over to line before
connection of line sources.
4. Third Line Input - Plug in a third line level device such as tape deck or additional CD player here.
5. Stereo Main Outpu -ts Unbalanced RCA connectors controllMaed sterby f the ader.
6. Balanced Main Output -s Low-impedance XLR type connectors controMaslletder by fade thre .
7. Mic Input - Plug your 1/4? Microphone plug in here.
8. Power Connector -Plug in power adapter here and check the voltage level to match your country?s standard.
9. Power Switch T-u rn on unit here.
- The Leader in DJ Technology
?2001 Numark Industries- 9 -http://www.numark.com |
ACEC
NUMARK
