UTILITY OUTEFX SEND
The stereo signal at these TRS jacks is theThe signal at these TRS outputs is post-
RING
(COLD)
TIPsame as at the MAIN OUT , but with onefader only, so they cannot be used as
(HOT)
SLEEVEimportant difference:traditional stage monitor cues. TheyOre in-
(SHIELD)
After the MAIN MIX Fader , the mix istended to patch into effects device inputs;
TRS BALANCED WIRING
sent through the UTILITY OUT LEVEL con-hence the name OEFX.� See EFX 1 (EXT)
trol, allowing you to set levels as desiredand EFX 2 (INT) for more information.
without disturbing the main mix level.Note: The EFX 2 signal path also feeds the
TIP
(HOT)
CFX MixerOs internal EMAC EFFECTS PRO-
SLEEVESUB OUT
(SHIELD)CESSOR inputs. If youOre using EMAC and
TS UNBALANCED WIRINGIn live sound applications, these TRS jacksjust one outboard processor, patch that proces-
can be patched into one or two stereo amplifi-sor via EFX SEND 1 for independent control of
ers, thereby allowing you to control levelsthe effects send level.
independently via the SUB Faders .We recommend going into a stereo reverb in
Alternatively, use the MAIN OUT tomono and returning in stereo. We have found
feed the amplifiers and one stereo SUB OUTthat on most Ostereo� reverbs the second input
pair to feed a recorder.just ties up an extra EFX send and adds noth-
In studio applications, these outputs can being to the sound. There are exceptions, so feel
used as four separate paths to feed four tracksfree to try it both ways. If your effects device is
of a multitrack recorder.true stereo all the way through, use EFX SEND 1
See ASSIGN and SUB ASSIGN forto feed its left input and EFX SEND 2 to feed
more information.the right input.
AUX SENDSTEREO EFX RETURN
To create a stage monitor mix, with levelsPatch the outputs of external parallel ef-
set independently from the main mix, patchfects devices to these inputs.
these TRS jacks into your monitor amplifier in-Note: The EFX 2 return signal is combined
puts. These jacks can also be used to feed thewith the signal from the CFX MixerOs internal
inputs of an effects device.EMAC EFFECTS PROCESSOR . If youOre
See AUX and PRE FADER for moreusing EMAC and just one outboard processor,
information.patch the outboard processor via EFX 1 RETURN
for independent control of the effects return level.
When connecting a mono device (just one
cord), always use the LEFT (MONO) input and
plug nothing into the RIGHT input. A trick
called Ojack normalling� will cause the signal to
appear on both sides.
STEREO EFXEFX SENDTAPETAPEMAIN INSERT MAIN OUTMAIN OUTLAMP
RETURNINPUT OUTPUT12V 0.5A
LR
LL
1
1L
LL
RR
2
2 RREFX
R
(MONO)(MONO)113
L
911FOOT
LEFTLEFTSWITCH
RIGHTRIGHT224
1012RS
75Hz
UTILITY OUTAUX SENDSUB OUTSUB OUTPHONES
10 |
ACEC
MACKIE
