PHILIPS DCR2020/02 Instruction Manual

DCR 2021_KDG_indice 1b 7/03/06 11:39 Page 81
4 Enter your new password again to confirm.
5 Press EXIT.
10.5 Advanced settings
The Settings sub menu menu includes the following items:
o TV Settings
o System Settings
o Country & Time SettingsEN
o Factory settings
o Decoder Status
10.5.1 TV Settings
This screen is used to set aspect ratio settings.
1 Select values for the following:
Y TV screen format: default setting is 4:3. If you
have a 16:9 screen TV, change this setting to 16:9
for optimal viewing.
Y Display format: set the way the video is
transformed in case the broadcast aspect ratio is
16:9 your TV aspect ratio is 4:3.
2 Press OK to confirm.
Aspect TV screen format = 4:3
Display ratio broadcast format = 16:9
format
LetterBoxfull picture with black bars at the
top and bottom
Centre Cut Out picture cut-out on the left and right
10.5.2 System Settings
This screen is used to set your receiver audio/video
output settings.
1 Select values for the following:
Y TV/VCR SCART Output: select the SCART
output format supported by your TV set and VCR
(refer to your TV and VCR user manual for more
information)
Y Dolby Digital: select Yes to enable Dolby Digital
sound
If you enable Dolby Digital sound, make sure you
use the digital audio output (no signal on the
analogue outputs).
Y Video/DVD Recorder Control:select the recording
control feature your recorder supports (refer to
your recorder user manual for more information)
81