Tone 88.5Hz test
1. In the adjustment mode, select channel 23 by rotating the main tuning dial.
2. Press the key. An 88.5Hz tone is automatically sent.
3. Check the deviation with the transceiver tester, and make sure the deviation
level is within 0.4 to 1.2kHz range.
Tone 250.3Hz test
1. In the adjustment mode, select channel 24 by rotating the main tuning dial.
2. Press the key. A 250.3Hz tone is automatically sent.
3. Check the deviation with the transceiver tester, and make sure the deviation
level is within 0.4 to 1.2kHz range.
DCS code 255 test
This function is only for checking the DCS code encoder, not adjusting it.
1. In the adjustment mode, select channel 25 by rotating the main tuning dial.
2. Press the key. A 255 DCS code is automatically sent.
3. Check the deviation with the transceiver tester, and make sure the deviation
level is within 0.5 to 1.5kHz range.
Tone Burst test
This function is only for checking the tone burst, not adjusting it.
1. In the adjustment mode, select channel 26 by rotating the main tuning dial.
2. Press the key. A 1750Hz tone burst is automatically sent.
3. Check the deviation with the transceiver tester, and make sure the deviation
level is within 2.3 to 3.7kHz range.
Digital mode deviation test (Optional EJ-43U required)
This function is only for checking the digital mode deviation, not adjusting it.
1. In the adjustment mode, select channel 27 by rotating the main tuning dial.
2. Press the key. A digital code ?000000? is automatically sent.
3. Check the deviation with the transceiver tester, and make sure the deviation
level is within 2.8 to 3.7kHz range.
32 |
ACEC
ALINCO
