ýg. Safety Precautions/Technical Feature
1. Safety Precautions(9) If the power cable is damaged, or if the connector is loose,
When servicing of PDP Module, it should be not enforced intodo not use the product: otherwise, this can lead to fire or
another way aside next rule, or a unaccustomed personelectric shock.
should not repairing.
When using/handling this PDP Module, pay attention to the(10) If the power connector or the connector of the power
below warning and cautions.cable becomes dirty or dusty, wipe it with a dry cloth.
Otherwise, this can lead to fire.
Warning(11) PDP Module uses a high voltage (Max.450V dc). Keep
the cautions concerning electric shock and do not touch
Indicates a hazard that may lead to death or injury if thethe Device circuitry when handling the PDP Unit. And
warning is ignored and the product is handled incorrectly.because the capacitor of the Device circuitry may remain
charged at the moment of Power OFF, standing by for 1
minute is required in order to touch the Device circuitry.
Caution
Indicates a hazard that can lead to injury or damage to
property if the caution is ignored and the product is handled
incorrectly.2) CAUTIONS
(1) Do not place this product in a location that is subject to
heavy vibration, or on an unstable surface such as anEnglish
1) WARNINGinclined surface. The product may fall off or fall over,
(1) Do not touch Signal and Power Connnector while thiscausing injuries.
product operates.
Do not touch EMI ground part and Heat Sink of Film Filter.(2) Before disconnecting cable from the product, be sure to
turn off the power. Be sure to hold the connector when
(2) Do not supply a voltage higher than that specified to thisdisconnecting cables. Pulling a cable with excessive force
product. This may damage the product and may cause amay cause the core of the cable to be exposed or break
the cable, and this can lead to fire or electric shock.
fire.
(3) This product should be moved by two or more persons. If
(3) Do not use this product in locations where the humidity isone person attempts to carry this product alone, he/she
extremely high, where it may be splashed with water, ormay be injured.
where flammable materials surround it.
Do not install or use the product in a location that does no(4) This product contains glass. The glass may break, causing
satisfy the specified environmental conditions. This may
damage the product and may cause a fire. injuries, if shock, vibration, heat, or distortion is applied to
the product.
(4) If a foreign substance (such as water, metal, or liquid) gets
inside the product, immediately turn off the power. (5) The temperature of the glass of the display may rise to
Continuing to use the product, it is may cause fire or80!C or more depending on the conditions of use.
electric shock. If you touch the glass inadvertently, you may be burned.
(5) If the product emits smoke, and abnormal smell, or makes(6) If glass surface of the display breaks or is scratched, do
an abnormal sound, immediately turn off the power. not touch the broken pieces or the scratches with bare
Continuing to use the product, it may cause fire or electrichands. You may be injured.
shock. (7) PDP Module requires to be handled with care not to be
touched with metal or hard materials, and must not be
(6) Do not disconnect or connect the connector while power tostressed by heat or mechanical impact.
the product is on. It takes some time for the voltage to drop
to a sufficiently low level after the power has been turned(8) There are some exposed components on the rear panel of
off. this product. Touching these components may cause an
Confirm that the voltage has dropped to a safe level before
disconnecting or connecting the connector. electric shock.
(7) Do not pull out or insert the power cable from/to an outlet(9) When moving the product, be sure to turn off the power
with wet hands. It may cause electric shock. and disconnect all the cables. While moving the product,
watch your step. The product may be dropped or all,
(8) Do not damage or modify the power cable. It may causeleading to injuries of electric shock.
fire or electric shock.
- 3 - |
ACEC
DAEWOO
