Heated Dry
Cycle Status Indicators
Follow the progress of your dishwasher with the Cycle Status
Select this option to dry dishes with heat. Indicators. Clean glows when a cycle is finished. The light turns
Switching off Heated Dry saves energy and is useful when loads
off when you open the door or press CANCEL/DRAIN.
contain plastic dinnerware that may be sensitive to high
temperatures. The dishes take longer to dry and some spotting
can occur.
For best drying, use a liquid rinse aid. Some items (such as
plastics) may need towel drying.Washing
NOTE: Heated Dry is an option with all cycles except Rinse Only.Washing glows while the dishwasher is washing or rinsing the
dishes.
Locked
Drying
Use Locked to prevent unintended use of the dishwasher. You
can also use the Locked feature to prevent unintended cycle or
Drying glows while the dishwasher is drying your dishes.
option changes during a cycle.
NOTE: When Locked is lit, all buttons are disabled.
Clean
To lock the controls
Press and holdClean glows when a cycle is finished. The light turns off when you
open the door or press CANCEL/DRAIN.
Drying System
During drying, you can see steam escaping through the vent at
for 5 seconds. Locked glows. If you press any pad while your the upper left corner of the door. This is normal as the heat dries
your dishes.
dishwasher is locked, the light flashes 3 times.
To unlock the controls
Press and hold HEATED DRY for 5 seconds until the light turns
off.
NOTE: The dishwasher door can be opened while the controls
are locked.
Delay Hours
IMPORTANT: The vapor is hot. Do not touch the vent
Use Delay Hours to run your dishwasher at a later time or during during drying.
off-peak hours. You can add items to the load anytime during the
delay countdown. After adding items, close the door firmly until it
latches. The delay countdown will not continue if the door is not Overfill Protection Float
latched.The overfill protection float (in the front right corner of the
dishwasher tub) keeps the dishwasher from overfilling. It must be
To delay the start
in place for the dishwasher to operate.
1. Close the door.
2. On models with a 2, 4, or 6-hour delay, press DELAY 1 time
for a 2-hour delay, 2 times for a 4-hour delay, or 3 times for a
6-hour delay.
On models with a 4-Hour Delay, press 4 HOUR DELAY once.
3. Select a wash cycle and option.
Check under the float for objects that may keep the protector
The number glows above Delay or 4 Hour Delay. The dishwasher from moving up or down.
starts the cycle in the selected number of hours. If you do not
press a cycle within 30 seconds, the Delay or 4 Hour Delay
indicator turns off.
NOTES:
To cancel the delay and cycle, press CANCEL/DRAIN.
To cancel the delay and start the cycle, press START/
RESUME.
16 |
ACEC
WHIRLPOOL
