Connections
Tips If your TV does not accept the Progressive Scan format,
Depending on your TV and other equipment you wish tothe picture will appear scrambled if you try Progressive
connect, there are various ways you could connect theScan on the DVD Player.
unit.
Connect the COMPONENT/ PROGRESSIVE
Please refer to the manuals of your TV, Stereo System or
1SCAN VIDEO OUT jacks on the DVD Player to the
other devices as necessary to make the best connections.
corresponding in jacks on the TV using the Y Pb Pr
For better sound reproduction, connect this unitOs AUDIO
cable.
OUT jacks to the audio in jacks of your amplifier, receiver,
stereo or audio/video equipment. See OConnecting toConnect the Left and Right AUDIO OUT jacks of the
optional equipment� on page 11.
2DVD Player to the audio left/right in jacks on the TV
using the audio cables.
Caution
� Make sure this unit is connected directly to the TV. Set theNotes
TV to the correct video input channel.� Set the Progressive to OOn� on the setup menu for
� Do not connect this unitOs AUDIO OUT jack to theprogressive signal, see page 18.
phono in jack (record deck) of your audio system.� Progressive scan does not work with the analog video
connections (yellow VIDEO OUT jack) or S-VIDEO
connection.
Connecting to a TV & Decoder
Make one of the following connections, depending on the
capabilities of your existing equipment.
Basic connection (AV)Rear of this unit (DVD exclusive out connection)
Connect the EURO AV1 AUDIO/VIDEO on the rear
1panel of this unit to the SCART input socket on the TV
using a SCART lead.
Some TV broadcasters transmit encoded television signals
2which you can only see with a purchased or rented
decoder.You can connect such a decoder (descrambler) to
the DVD+VCR.
Basic connection (RF)
Connect the RF antenna cable from your indoor/ outdoor
1antenna to AERIAL jack on the rear panel of this unit.
Rear of TV
Connect the supplied RF antenna cable from the RF OUT
AERIALVIDEO COMPONENT VIDEO INPUT/AUDIO INPUTSCART INPUTS-VIDEO INPUT
2jack on the rear panel of this unit to your televisionOsINPUTPROGRESSIVE SCAN
Antenna Input.PrPbYLR
DVD exclusive out connection
Component Video (Color Stream¨) connection
Decoder
Connect the COMPONENT/PROGRESSIVE
1SCAN VIDEO OUT jacks on the DVD Player to the
corresponding in jacks on the TV using the Y Pb Pr
cable.
Connect the Left and Right AUDIO OUT jacks of the
2DVD Player to the audio left/right in jacks on the TV
using the audio cables.
S-Video connection
Connect the S-VIDEO OUT jack on this unit to the S-
1Video input jack on the TV using the S-Video cable.Rear of this unit (Basic connection)
Connect the Left and Right AUDIO OUT jacks of the
Note
2DVD Player to the audio left/right in jacks on the TV
� If the TV has an S-video input, connect the DVD player
using the audio cables.
with the S-video cable.When using an S-video cable, do
¨not connect the yellow video cable.
Progressive Scan (ColorStreamPro) connection
If your television is a high-definition or Odigital ready�
television, you may take advantage of the DVD PlayerOs
progressive scan output for the highest video resolution
possible.
10 |
ACEC
PHILIPS
