1234
[Tips]Y Indication when the maximum number (12) of channels have individual settings
If a channel that does not have specific settings is currently selected, the indication will be as shown below,
and individual data items cannot be set for that channel. To set individual data items for the currently selected
Achannel, you must clear any specific-channel settings for one or more channels.
AVIO Specific Area Mode Ver.200
Input - [ TUNER ]
Sync AGC : ON*
Threshold : Manual Threshold Level
Threshold Level : 052
Bottom Limit : 000*
Individual setting state
B Sorry !
You can store only 12 channels
for Specific Area mode.
2. General Setting mode
[How to enter this mode]
Y To shift from Specific-Channel Setting mode:
Each time the DIG/ANA key is pressed, Specific-Channel Setting mode and General Setting mode
Care alternately selected.
Y To shift from Normal mode (recording/playback stop):
Press the ESC then CHP/TIM keys.
[How to exit]Press the ESC key to return the normal mode.
[Setting examples]
Show setting example on the General Setting mode screen to the following.
DRegarding setting of actual each item, refer to table 1 (key operations in specific-area setting mode).
[Display in General Setting mode when the channel
[General Setting mode screen]currently displayed has specific settings]
AVIO Specific Area Mode Ver 2.00AVIO Specific Area Mode Ver 2.00
Input - [ TUNER ] Input - [ TUNER ]
Sync AGC : ON * Sync AGC : ON *
Threshold : Normal * Threshold : Normal *
Threshold Level : Threshold Level :
Bottom Limit : 000 * Bottom Limit : 000 *
E
This channel is set up
*: Setting is the default. individually.
[Tips]Y General Setting mode can be entered only during recording/playback stop.
Y The currently selected input mode (TUNER or LINE) is displayed for "Input."
Y If L1, L2, L3, or DV is selected for input, general settings for the line input can be made (DV is not valid for
specific-area settings), and if TUNER is selected, general settings for the tuner input can be made.
F
76DVR-533H-S
1234 |
ACEC
PIONEER
