electrolux 43
Operation
Push-Pull control knobs
The appliance is provided with push-
pull control knobs (see picture). These
knobs can be completely sunken inside
the control panel when the oven/hob is
not working.
Ceramic hob cooking zones
To switch on a cooking zone, turn the
relevant control knob clockwise to the re-
quired heat setting.
The control knob is numbered 0 - 9.
0 - OFF
9 - Maximum.
The hob has two types of cooking zones:Control knob for normal cooking
zone
3 normal cooking zones (back left,3 normal cooking zones (back left,3 normal cooking zones (back left,3 normal cooking zones (back left,3 normal cooking zones (back left,
back right and front right)back right and front right)back right and front right)back right and front right)back right and front right)
We recommend the plates are
switched to maximum (9) for a short
while to boost the cooking zone, and
then adjusted to the required setting.
1 double circuit cooking zone (front1 double circuit cooking zone (front1 double circuit cooking zone (front1 double circuit cooking zone (front1 double circuit cooking zone (front
left)left)left)left)left)
The front left cooking zone has two
heating elements.
- To switch on the smaller circular
cooking zone, turn the relevant con-Control knob for double circuit
cooking zone
trol knob clockwise to the required
heat setting.
- To switch on both heating elements,
turn the control knob clockwise to
maximum heat setting (9) then turn the
knob further to nearly reach the "0"
symbol. You will hear a "click" and the
wider cooking zone will switch on.
Then turn back the knob to position 9
and adjust it to the required heat
setting.
Please be aware that the two heating
elements will now operate together, giv-
ing a higher power output than a normal
cooking zone. |
ACEC
ELECTROLUX
