Safety and energy saving functions
Safety Cut-Off Function"Fast Heat Up" function (Booster)
The oven will switch off automatically if any change ofAfter a cooking function has been selected and the
setting is made, according to the table below (Fig. 13).temperature has been adjusted, the cavity will gradually
heat up until the selected temperature is reached. This
will take from 10 to 15 minutes, depending on selected
If temperature setting is: the oven will switch off:
function and temperature.
250°Cafter 3 hours
If it is necessary to reach the required temperature in a
from 200 up to 245°Cafter 5,5 hoursshorter time, the fast heat up function can be used.
from 120 up to 195°Cafter 8,5 hours1. Switch the oven on by pressing button .
less than 120°Cafter 12 hours2. Set the required cooking function and temperature as
explained in the previous pages.
3. Set the temperature by pressing button or . The
temperature will appear in the display.
4. Press button . The temperature display will show
"FHU" (Fig. 15).
5. Press button and the symbol ?? will flash for
°
approximately 10 seconds. Now it is possible to
select the required temperature by pressing button
Fig. 13 or .
6. When the required temperature is reached, an acoustic
Child Safety Function
alarm will sound for a short time, and the temperature
To avoid children switching on the oven, it is possibledisplay will revert to the set temperature.
to lock the oven controls.
This function can be used with any cooking function or
1. Turn off the oven by pressing button .temperature.
2. Press buttons and at the same time and
keep them pressed for about 3 seconds. An
acoustic signal will be emitted and the indication
?SAFE? will appear in the display (Fig. 14).
3. The oven is now locked. Neither oven functions
nor temperatures can be selected.
To unlock the oven:
Press buttons and at the same time and keep
them pressed for about 3 seconds. An acoustic signal
will be emitted and the indication ?SAFE? will go off.
The oven can now be operated.
Fig. 15
Residual Heat Function
When a Cooking Duration time is set, the oven will
automatically switch off a few minutes before the end of
the programmed time, and use the residual heat to finish
your dishes without energy consumption. All current
settings will be displayed until the Cooking Duration time
is over.
This function will not operate when the Cooking Duration
time is less than 15 minutes.
Fig. 14
10 |
ACEC
ELECTROLUX
