How to use the pyrolytic cleaning
1
function
Before activating the pyrolytic cleaning function,
remove any excessive spillage and make sure
that the oven is empty.
Do not leave anything inside the oven cavity
(e.g. pans, grids, baking tray, dripping pan, etc.)
as this could heavily damage them.
Before activating the pyrolytic cleaning function,
remove the oven shelves and shelf supports.
To remove the oven shelves and the shelf supports proceed
as follows:
1. remove the front screw while keeping the shelf support
in position with the other hand (see diagram 1);
2. disengage the rear hook and take off the shelf support (see2
diagram 2);
3. once the cleaning is carried out, refit the shelf supports
following the procedure in reverse.
Please, ensure the retaining nuts are secure when refitting the
shelf support.
Ensure that the oven door is closed before activating
the pyrolytic cleaning function.
When the pyrolytic cleaning function is on, it is
advisable not to use a hob if it is fitted above the oven.
This could cause overheating and damage to both
appliances.
During the pyrolytic cleaning cycle the oven door
becomes hot. Children should be kept away until it
has cooled.
The following pyro levels are available:
Pyrolytic 1 (Pyro 1) time : 2 h = 30 min heat-up +1 h at
480°C + 30 min cooling down.
Pyrolytic 2 (Pyro 2) time : 2 h 30 min. = 30 min heat-up +1
h 30 min at 480°C + 30 min cooling down.
The pyro duration time cannot be changed.
To activate the pyrolytic cleaning function proceed as
!follows:Fig. 25
1. Press button to switch on the oven.
2. Press button as often as necessary, until the ?Pyro?
function symbol (Pyro 1-level 1) will appear on the
display (Fig. 25).
The indication ?REMOVE SHELF SUPPORTS? will ap-
pear on the display.
Remove the shelf supports and all oven acces-
sories before activating the pyrolytic cleaning
cycle.
3. While symbol flashes, press button or to
Fig. 26
select the pyrolytic 1 (Pyro 1) or pyrolytic 2 (Pyro 2)
function (Fig. 26).
4. Once you have chosen the desired pyrolytic function,
the ?Pyro? writing will flash on the display waiting for
confirmation to start the pyrolytic cleaning function.
5. To confirm which pyrolytic function you desire, press
button , the ?Pyro? text will stop flashing, the oven
lamp will switch off and the pyrolytic cleaning cycle starts
(Fig. 27).
As soon as the oven heats up, the thermometer symbolFig. 27
rises slowly , indicating that the temperature inside the
oven is increasing.23 |
ACEC
ELECTROLUX
