Maintenance and
Cleaning
Before any maintenance or cleaning work
Defrosting
is carried out DISCONNECT the applian-
Your appliance is frost free, which means there is
ce from the ELECTRICITY supply.
no need to manually defrost your appliance, as this
will be carried out automatically.
External Cleaning
Wash the outer cabinet with warm soapy water.
Changing the light bulb
1. Switch off the appliance by pressing the
Do not use abrasive products.
ON/OFF button, and then unplug the appliance.
There may be sharp edges on the under-
3. Open the plastic light cover, by pushing
side of the product so care should beupwards on the centre clip. The cover will then
taken when cleaning.swing down.
4. Unscrew the light bulb and replace with a bulb
Ensure the vents at the back of the appliance are clearwith the following specifications:
of dust and debris etc.
Internal Cleaning
Clean the inside and accessories with warm water and
bicarbonate of soda (5ml to 0.5 litre of water).
Rinse and dry thoroughly.
Do not use detergents, abrasive powders,
highly perfumed cleaning products, wax
polishes or cleaning products containing
2 standard bulbs 25W-E14
bleach or alcohol.
Regularly check the door seals and wipe clean to ensu-
re they are clean and free from debris.
When the appliance is not in use
When the appliance is not in use for long periods,
Cleaning the Condenser
disconnect from the electricity supply, empty all of
The Condenser at the bottom of your appliance needsthe food and clean the inside of the appliance.
to be cleaned periodically. Remove the plinth, and
Switch off the appliance and leave the door ajar to
clean with a vacuum cleaner. Ensure the plinth is repla-
prevent unpleasant smells.
ced after cleaning.
NOISE REDUCTION PAD
(DON?T REMOVE)
7 |
ACEC
ELECTROLUX
