Using the fridge
To start the fridge and thermostat
control
Turn the thermostat control knob to the desired
position.
MIN The lowest position of the thermostat control
results in the highest temperature inside the cabinet.
MAX The highest position of the thermostat control
results in the lowest temperature inside the cabinet.
H : Switched off.
Allow the appliance to run for a period of 24 hours
whenever the temperature setting is changed. This
will allow the temperature to stabilise inside the
appliance.+
Temperature inside the fridge+
--
A suitable temperature inside the fridge is approx.
+5°C. If the thermostat control is set too cold, food----
with a high water content may start to freeze if it has--
been placed in the coldest places in the fridge.+
(+ warm, - cold)++
Meat, fish and milk should be put in the coldest part
++
of the cabinet.+
The temperature will be affected by:
? How often the door is opened
? How much food is stored
? Position of the appliance (See the Installation
section.)
Measuring the temperature
If the temperature is measured using a standard,
single thermometer, this should be put in a glass of
water centrally placed inside the appliance. This will
reflect the temperature inside the food products. Do
not place the thermometer hanging or lying directly
on the shelf.
? Distribute foodstuffs to allow cold air to
circulate freely between the products.
? Do not place food products directly against the
cooling plate on the rear wall as they may
freeze here.
? Also never put warm products into the appliance.
Wait until they have cooled down.
? Cover all foods properly to avoid odours and
flavours from tainting other food.
Switching off
Turn the control anti-clockwise past the click
position to "H".
Remove the power supply plug from the wall socket.
Electrolux 818 21 42-01/1
5 |
ACEC
ELECTROLUX
