132982830 GB.qxd 02/03/2006 8.36 Pagina 6
The other end of the inlet hose which connects toThe drain hose must not be kinked.
the machine can be turned in any direction. Simply
loosen the fitting, rotate the hose and retighten the
fitting, making sure there are no water leaks
For a correct functioning of the machine the
drain hose must remain hooked on the proper
support piece situated on the top part of the back
The inlet hose must not be lengthened. If it is too
short and you do not wish to move the tap, you willside of the appliance.
have to purchase a new, longer hose specially
designed for this type of use.Electrical connection
This machine is designed to operate on a 220-230
Water drainageV, single-phase, 50 Hz supply.
Check that your domestic electrical installation can
The end of the drain hose can be positioned in three
ways:take the maximum load required (2.2 kW), also
Hooked over the edge of a sink using the plastictaking into account any other appliances in use.
Connect the machine to an earthed socket.
hose guide supplied with the machine. In this
case, make sure the end cannot come unhooked
when the machine is emptying.The manufacturer declines any responsibility
This could be done by tying it to the tap with a piecefor damage or injury through failure to comply
of string or attaching it to the wall.with the above safety precaution.
Should the appliance power supply cable
need to be replaced, this should be carried
out by our Service Centre.
Please ensure that when the appliance is
installed the power supply cable is easily
accessible.
Assembly upon a stand kit
In a sink drain pipe branch. This branch must be
above the trap so that the bend is at least 60 cm
above the ground.Stand Dimension:
Height: 30 cm.
Directly into a drain pipe at a height of not lessWidth: 60 cm.
than 60 cm and not more than 90 cm.Depth: 60 cm.
The end of the drain hose must always be
ventilated, i.e. the inside diameter of the drain pipe
must be larger than the outside diameter of the drain
hose.
This appliance can be installed upon a steel Stand
with Drawer to make the loading and unloading of
your laundry easier.
Please ask authorized dealer the suitable stand kit.
6 |
ACEC
ELECTROLUX
