TROUBLESHOOTINGJuly 30th, 1996
MECHANICAL PROBLEMS
2. Jam
Possible Cause:
?An incorrect type or size of document is used.
?The document is too long.
?The scanner rollers (pick-up and feed rollers) are dirty.
?Obstruction in the document paper path.
?The scan line sensor is defective.
?Defective tx motor
Action:
1. Check that a correct type of document is being used, and that the docu-
ment length is within the maximum setting.
2. Check for obstructions in the paper path.
3. If the problem still remains, do the following.
?Clean the rollers with a soft cloth and water, and replace them if they
are damaged.
?Check that the scan line sensor is working correctly.
?Replace the Tx motor.
7-14 |
ACEC
RICOH
