Troubleshooting
Poor radio reception.� The signal is too weak, adjust the antenna or
Englishconnect an external antenna for better
reception.
� The TV or VCR is too close to the stereo
system.
Recording or playback cannot be� Dirty tape heads, capstans or pressure
made or there is a decrease in audiorollers, refer to section under Maintenance.
level.� Magnetic build-up in the record/playback head,
use demagnetizing tape.
System does not react when any� Press STANDBY-ON to switch the system
button is pressed.off. Remove the AC power plug from the wall
outlet, then reconnect the power plug and
switch on the system again.
No or poor sound.� Adjust the volume.
� Disconnect the headphones.
� Check that the speakers are connected
correctly.
� Check if the stripped speaker wire is clamped.
Reversed left and right sound.� Check the speaker connections and location.
Lack of bass sound or apparently� Check the speaker connection for proper
imprecise physical location of musicalphasing, colored/black wires to colored/
instruments.black terminals.
Remote control has no effect on the� Select the source (CD, TUNER, etc.)
system.before pressing the function button (Ã�,Ã,ë,
etc.).
� Reduce the distance to the system.
� Insert the batteries with their polarities
(+/- signs) as indicated.
� Replace the batteries.
Timer is not working.� Set the clock.
� Press CLOCKTIMER to switch on the timer.
� If recording is in progress, stop recording.
Clock setting is erased.� Reset the clock.
System displays features automatically.� Press and hold � (on the system) for
five seconds to switch off the
demonstration.
27
3139 115 20281
pg 01-27/C100/22-Eng2712/6/00, 3:18 PM |
ACEC
PHILIPS
