2 Fill the water tank with tap water up to the 1 Make sure that there is enough water in the water
ENGLISH
maximum level. (Fig. 3)tank.
IntroductionIf the tap water is very hard, we advise you to use distilled 2 Select the required ironing temperature (see
water.
Thanks to its compact, lightweight design, this iron is ideal section Setting the temperature). (Fig. 5)
for quick ironing jobs or for taking it along in its handy Do not ll the water tank beyond the MAX indication., The steam boost function can only be used at
pouch when you are travelling.
Do not put perfume, vinegar, starch, descaling agents, temperature setting 3.
The iron can safely be used at all mains voltages
ironing aids or other chemicals in the water tank.
(110V/220V), as it is equipped with a voltage selector. If 3 Press and release the steam boost button. (Fig. 11)
needed, suitable adapter plugs are available from Philips 3 Close the cap of the lling opening (click). (Fig. 4)
Cleaning
dealers, service centres, hotel receptions or hardware
Setting the temperature
shops. 1 Remove the mains plug from the wall socket and let
the iron cool down for at least
General description (Fig. 1) 1 Check the laundry care label for the required 30 minutes.
ironing temperature.
A Steam boost button
2 Clean the appliance with a damp cloth.
B Steam control-1 Synthetic fabrics (e.g. acrylic, nylon, polyamide,
C Temperature-ready indicator polyester) Storage
D Cap of lling opening
-1 Silk 1 Set the steam control to position O (no steam).
E Filling opening
F Dual voltage selector-2 Wool 2 Remove the mains plug from the wall socket.
G Temperature control
-3 Cotton, linen 3 Let the iron cool down for at least
H Mains cord
30 minutes.
I Grip area 2 Set the temperature control to the required ironing
J Soleplate & button groovetemperature. (Fig. 5) 4 Empty the water tank. (Fig. 12)
Not shown: Pouch (GC651/650 only)
3 Place the iron on its heel. (Fig. 6) 5 Wind the mains cord round the appliance. (Fig. 13)
Not shown: Tablecloth (GC651 only)
4 Put the mains plug in an earthed wall socket. 6 Store the appliance in the pouch.
Important, The temperature-ready indicator goes on to
Environment
Read these instructions for use carefully before using the indicate that the iron is heating up. (Fig. 7)
appliance and save them for future reference., Do not throw the appliance away with the normal
5 When the temperature-ready indicator has gone
, Check if the dual voltage selector has been set to household waste at the end of its life, but hand it in
out, wait a while before you start ironing.
the local mains voltage before you connect the at an ofcial collection point for recycling. By doing
appliance.Tipsthis you will help to preserve the environment. (Fig.
You can adjust the position of the dual voltage selector by -If the article consists of various kinds of bres, always 14)
means of a pen.select the temperature required by the most delicate
, It is advisable to always reset the selector to bre i.e, the. lowest temperature If, f.or example the, Guarantee & service
position 220/240 after use. This will prevent damage fabric consists of 60% polyester and 40% cotton, it If you need information or if you have a problem, please
if the iron is inadvertently connected to the wrong should be ironed at the temperature indicated for visit the Philips website at www.philips.com or contact
voltage.the Philips Customer Care Centre in your country (you
polyester (1).
, Use an earthed adapter plug if the mains plug does will nd its phone number in the worldwide guarantee
-If you do not know what kind or kinds of fabric
not match the local wall socket.leaet). If there is no Customer Care Centre in your
an article is made of, determine the right ironing
, If the appliance is provided with an earthed plug, it country, turn to your local Philips dealer or contact the
temperature by ironing a part that will not be visible
must be plugged into an earthed wall socket.Service Department of Philips Domestic Appliances and
when you wear or use the article.
, Do not connect the appliance to a wall socket Personal Care BV.
-Silk, woollen and synthetic materials: iron the reverse
intended for shavers.
side of the fabric to prevent shiny patches.
, Do not use the iron in your hotel room
-Fabrics that tend to acquire shiny patches should be
simultaneously with another high-wattage appliance
ironed in one direction only (along with the nap)
(e.g. a hairdryer) to avoid blowing the fuse.
while applying very little pressure.
, Do not use the appliance if the plug, the cord or
-Start ironing the articles that require the lowest
the appliance itself shows visible damage, or if the
ironing temperature, i.e. those made of synthetic
appliance has been dropped or is leaking.
materials.
, Check the cord regularly for possible damage.
, If the mains cord is damaged, it must be replaced Using the appliance
by Philips, a service centre authorised by Philips
Steam ironing
or similarly qualied persons in order to avoid a
hazard.
1 Make sure that there is enough water in the water
, Never leave the appliance unattended when it is
tank.
connected to the mains.
, Never immerse the iron in water. 2 Select the required ironing temperature (see
, Keep the appliance out of the reach of children.section Setting the temperature). (Fig. 5)
, Young children should be supervised to ensure that , Steam ironing is only possible at temperature
they do not play with the appliance.
setting 3.
, This appliance is not intended for use by young
children or inrm persons without super 3 vision. Set the steam control to position \. (Fig. 8)
, The soleplate of the iron can become extremely hot The iron will start steaming as soon as the set
and may cause burns if touched.temperature has been reached.
, Do not allow the cord to come into contact with
Ironing without steam
the soleplate when it is hot.
, When you have Anished ironing, when you clean the
1 Select the required ironing temperature (see
appliance, when you All or empty the water tank
section Setting the temperature). (Fig. 5)
and also when you leave the iron even for a short
while: set the steam control to position O, put the 2 Set the steam control to position O (no steam).
iron on its heel and remove the mains plug from the (Fig. 9)
wall socket.
Ironing without ironing board
, Always place and use the iron on a stable, level and
horizontal surface.
, When you are travelling, an ironing board will often
, This appliance is not intended for regular use.
not be at hand. In this case, spread the tablecloth
Before first use(GC651 only) or a folded terrycloth towel on a
rm, at surface .
1 Remove any sticker or protective foil from the
(Fig. 10)
soleplate and clean the soleplate with a soft cloth.
Make sure that the surface is heat- and moisture-resistant.
Preparing for useDo not use a glass or plastic surface.
Filling the water tankFeatures
Steam boost
, Make sure the appliance is unplugged.
1 Open the cap of the lling opening. (Fig.This function 2) provides extr steama to remove ver y
stubborn creases.
000 61
2/9 |
ACEC
PHILIPS
