8ENGLISH
C3If the floor is not level, turn the adjustable feet until the ironing
board is stable and firmly placed on the floor.
Using the appliance
To prevent condensation inside the ironing board, it is recommended
that you use the blowing mode periodically during steam ironing.
BTip:Also see the instruction video.
C1Pull the mains cord out of the cord storage compartment.
2Put the plug in an earthed wall socket.
C3Fold out the steam tank tray.
C4Switch the ironing board on by pushing the on/off switch to
position I.
When the ironing board is switched on, it will automatically start toOI
heat up.
C5Set the fan switch to suction or blowing mode.
The proper fan mode depends on the type of fabric:
OI
� Suction mode � : wool, cotton, linen.
To fix garments on the ironing board for firm pressing and better
ironing results or to make pleats in thick fabrics.
� Blowing mode O : silk, synthetic fabrics (e.g. acrylic, viscose,
polyamide, polyester, etc.).
For gentle pressing of fabrics to prevent shiny patches and to avoid
unwanted creases. |
ACEC
PHILIPS
