Connecting the Unit
Connecting the Power Terminal3. Attach lugs to wire ends. Lugs not
supplied.
Y Always use the special red battery and ground
Y Use pliers, etc., to crimp lugs to wires.
wire [RD-223], which is sold separately. Connect
the battery wire directly to the car battery positive
Lug
terminal (+) and the ground wire to the car body.
1. Pass the battery wire from the
engine compartment to the interiorGround wire
of the vehicle.Lug
Y After making all other connections to the
amplifier, connect the battery wire terminal
Battery wire
of the amplifier to the positive (+) terminal of
the battery.
Fuse (30 A) EngineInterior of
compart-
the vehicle
ment4. Connect the wires to the terminal.
Y Fix the wires securely with the terminal
screws.
Fuse (30 A)Drill a 14 mmGND terminal
Positive terminalhole into theSystem remote
Power terminal
vehicle body.control terminal
Insert the O-ring rubber
grommet into the vehicle
body.
System remote
control wire
Ground wire
2. Twist the battery wire, ground wire
and system remote control wire.
Twist
Battery wire
WARNING
Failure to securely fasten the battery wire to the ter-
minal using the terminal screws could cause the ter-
minal area to overheat and could result in damage
and injury including minor burns.
7 |
ACEC
PIONEER
