8EnglisH
MessageMeaningWhat to do
The water tank is dirty or Rinse or descale the water tank.
scale has deposited in the
water tank.
GROUND TOO The appliance cannot brew Insert the hot water spout, press the button and
FINE! Adjust mill coffee.let water run out of the spout for a few seconds.
- INSERT WATER
SPOUT - Press
hot water
The coffee is brewed too Turn the grinding coarseness knob clockwise
slowly.one setting (see section Regulating the coffee
mill in chapter Using the espresso maker).
INSERT WASTE After cleaning, the waste bin Open the service door and insert the waste bin.
BINhas not been reinserted into
the appliance.
NO GROUND You have selected the ground Add ground coffee (see section Brewing
COFFEE! -Fill coffee function but you have espresso from ground coffee in chapter Using
container-not put ground coffee in the the espresso maker).
appliance.
NO COFFEE The coffee beans have run out. Fill the coffee bean container.
BEANS! -Fill
container-
If the coffee grinder is very Contact an authorised Philips service centre.
noisy, this means a small stone
in the coffee beans has blocked
the mill.
LESS GROUND The ground coffee funnel is Switch off the appliance and empty the funnel
COFFEE!clogged.with the handle of a spoon. Be careful not to
damage the funnel.
You have put too much ground Reduce the quantity of ground coffee. Then brew
coffee in the appliance.coffee again.
PLEASE This indicates the presence Perform the descaling procedure as soon as
DESCALE!of scale in the appliance.possible (see section Descaling in chapter
Setting menu parameters).
CLOSE DOOR!The service door is open.Close the service door. If the service door
cannot be closed, make sure that the brewing
unit is inserted correctly (see section Cleaning
the brewing unit in chapter Cleaning).
INSERT You have probably not Insert the brewing unit (see section Cleaning the
BREWING UNIT!reinserted the brewing unit brewing unit in chapter Cleaning).
after you cleaned it. |
ACEC
PHILIPS
