, Do not use the machine at altitudes higher than -q MIN: minimum amount of water required to brew
English\
2200 metres above sea level.1 cup of SENSEO coffee.
, The machine does not work at temperatures below -qq MIN: minimum amount of water required to
introduction10 C. brew 2 cups of SENSEO\ coffee.
With Douwe Egberts SENSEO\ coffee pods, you can , Flush the coffee machine with fresh water before -A full reservoir allows you to make 6 large cups h, 8
enjoy a perfect cup of coffee at any time of the day. Every using it for the rst time (see chapter Prmedium cups eparing g or
cup is freshly brewed to give you that smooth and full the machine for use). This will cause the boiler to 10 small cups f of SENSEO\ coffee. This makes it
taste. ll with water, which is essential for the machine to unnecessary to ll the water reservoir each time you
Using more than 250 years of coffee expertise, Douwe work properly.want to make a cup of coffee.
Egberts has roasted and ground specially selected coffee , This appliance is not intended for use by persons
2 Press the on/off button 3. (Fig. 9)
beans that, when prepared using a special brewing (including children) with reduced physical, sensory
, The indicator light blinks slowly and the display
method co-developed with Philips, ensure a full, smooth or mental capabilities, or lack of experience and
shows the heat-up indication D while the water
taste and delicious foam layer. This joint creation, known knowledge, unless they have been given supervision
as the SENSEO\ coffee pod system, consists of the or instruction concerning use of the appliance by a is heating up. Heating up takes approx. 90
seconds. (Fig. 11)
Philips SENSEO\ coffee machine and specially developed person responsible for their safety.
Douwe Egberts SENSEO\ coffee pods. Only when used , Children should be supervised to ensure that they , The coffee machine is ready for use when the
indicator light burns continuously and the light rings
together will you be rewarded with a sensational cup of do not play with the appliance.
SENSEO\ coffee with the delicious SENSEO\ foam layer. around the 1- cup button q and the 2-cup button
Electromagnetic elds (EMF)qq go on.
To ensure a smooth and full coffee taste, you should keep
, If the indicator light blinks rapidly and the display
the following things in mind:This Philips appliance complies with all standards
shows the water rell indication s, the water
regarding electromagnetic elds (EMF). If handled
Fresh waterreservoir does not contain enough water for
properly and in accordance with the instructions in this
brewing one cup of coff (Fig. 12)ee.
Use fresh water every day. If you have not used the coffee instruction manual, the appliance is safe to use according
, If there is not enough water for brewing two cups
machine for three days, you have to ush it with fresh to scientic evidence available today.
of coffee, the light ring around the 2-cup button
water before you use it again (see section Flushing in
chapter Cleaning).Preparing the machine for useqq will not go on and this button cannot be
operated.
YOU CANNOT BREW COFFEE IF YOU HAVE NOT
Fresh coffee pods\
FLUSHED THE SENSEO COFFEE MACHINE FIRST! 3 Release the lid by moving the le (Fig.v er upwar4).ds
Use the SENSEO\ coffee pods that have been specially Note that the display will not work until you have
developed by Douwe Egberts for your SENSEO\ coffee ushed the machine. 4 Open the lid.
machine for a full, round taste. The Douwe Egberts 5 Place the appropriate pod holder in the machine.
SENSEO\ coffee pods will stay fresh longer if you store The ushing cycle causes the boiler to be lled with
water. After this the coffee machine is ready for use. Note: Make sure the pod holder is clean and the sieve in the
them in an airtight storage container.
Flush the machine in the following way:centre is not clogged, e.g. with loose coffee grounds.
A clean machine, If you want to make one cup of SENSEO\ coffee,
1 Remove the water reser (Fig.v 2).oir
Clean and descale your Philips SENSEO\ coffee machine use 1 coffee pod in combination with the 1-cup pod
2 Fill the water reservoir with cold water up to holder q and the 1-cup button q. (Fig. 13)
regularly (see chapters Cleaning and Descaling). Remove
, If you want to make two cups of SENSEO\ coffee,
used coffee pods after brewing. If a used pod has been the MAX indication and put it back onto the
use 2 coffee pods in combination with the deeper
left in the coffee machine and you have not used the machine (Fig.. 3)
2-cup pod holder qq and the 2-cup button
machine for some time, ush the machine before you use
3 Release the lid by moving the le (Fig.v er upwar4).qdsq. (Fig. 14)
it again (see section Flushing in chapter Cleaning).
4 Open the lid (Fig. 5). 6 Place the SENSEO\ coffee pod(s) properly in the
general description (Fig. 1)centre of the pod holder, with the convex side
5 Put the 1-cup pod holder q or the 2-cup pod
A Display pointing downwards.
holder qq in the machine without pod(s). (Fig. 6)
1 Heat-up indication
Note: Use SENSEO\ coffee pods from Douwe Egberts
2 Coffee volume indication 6 Close the lid and lock the le (Fig. 7). ver
specially designed for your SENSEO\ coffee machine for a
3 Water rell indication
Note: Make sure the lever is properly locked by pushing it full and round taste.
4 Descaling indication
down until it snaps home with a click.
B Volume select button Note: Make sure the coffee in the pod(s) is evenly distributed
C Outow valveNote: Never ush the machine with the lid open.and press the pod(s) lightly into the pod holder The lid .
D Water reservoir must be properly locked.
Note: Never put normal ground coffee or use torn pods
E Grip area
7 Put the plug in an earthed wall socket. in the SENSEO\ machine, as this will cause it to become
F Sealing ring
blocked.
G Water distribution disc 8 Put a bowl (with a capacity of at least 1500
, Place 1 SENSEO\ coffee pod in the 1-cup pod
H 1-cup pod holder q ml) under the spout openings to collect the
holder q. (Fig. 15)
I 2-cup pod holder qqwater .(Fig. 8)
, Place 2 SENSEO\ coffee pods in the 2-cup pod
J Cover of coffee spout
9 Press the on/off button 3. (Fig. 9)holder qq. (Fig. 16)
K Coffee spout
After pressing the on/off button 3, the display lights up
L Coffee collector 7 Close the lid and lock the le (Fig. 7). ver
for a moment and the light rings around the 1-cup button
M Cup tray Always check if the lid is properly locked. The lever must
q and the 2-cup button qq burn continuously.
N Drip tray be pushed down until it snaps home with a click.
O 1-cup button q 10 Press the 1-cup button q and the 2-cup button
Never start brewing with the lid open. The lid must be
P Water level light rings qq briey at the same time (Fig. 10) .
properly closed.
Q On/off button with indicator light, The boiler lls itself with water from the water
R 2-cup button qqreservoir. This may take some time (appr 8 o Place one cup or twx. o cups under the spout
90 to 150 seconds). The machine switches off openings. You can adjust the height of the coffee
importantautomatically when the ushing cycle ends. During spout by sliding it upwards or do (Fig. 17).wnwards
Read these instructions for use carefully before using the the ushing cycle the machine produces morThe cups ye noise ou use should have a capacity of at least
machine and save them for future reference. than during a regular brewing cycle.100ml when brewing small cups f, 150ml when brewing
, Check if the voltage indicated on the bottom of medium cups g and 170ml when brewing large cups h
Never interrupt the ushing cycle halfway. If you do, the
the machine corresponds to the local mains voltage of SENSEO\ coffee. Do not use cups that are too large,
boiler will not ll itself properly.
before you connect the machine.as they will cause the coffee to get cold more quickly.
, If the mains cord is damaged, it must be replaced
Note: Before you use the machine for the r 9 st timeSelect the desir, clean ed coffee volume by pressing the
by Philips, a service centre authorised by Philips
the coffee spout, the coffee collector and the pod holdervolume select button s j.
or similarly qualied persons in order to avoid a
with hot water and some washing-up liquid or in the By varying the volume, you will also affect the
hazard.
dishwasher. Clean the water reservoir thoroughly in hot strength of the coffee.
, To prevent unexpected contact with hot water,
always make sure the lid of the SENSEO \ machine water, if necessary with some washing-up liquid., Select 1 bar for a small cup of coffee (80
Now your Philips SENSEO\ coffee machine is ready for ml) (Fig. 18)
is properly locked before you start using the
use. , Select 2 bars for a medium cup of coffee (125
machine.
ml) (Fig. 19)
, Never put normal ground coffee or use torn pods Brewing coffee
in the SENSEO\ machine, as this will cause it to , Select 3 bars for a large cup of coffee (145
1 Fill the water reservoir with cold water up to ml) (Fig. 20)
become blocked.
, Do not use the machine in combination with the MAX indication and put it back onto the 10 Press the button indicating the number of cups of
a transformer, as this could cause hazardous machine (Fig.. 3)SENSEO \ coffee you want to br (Fig. 21)ew.
situations. -Press the 1-cup button q for one cup.
Never pour milk, coffee, hot water or carbonated water
, Put the machine on a at, stable surface.-Press the 2-cup button qq for two cups.
into the water reservoir.
, Never let the machine operate unattended.
.1..
2/4 |
ACEC
PHILIPS
