ENGLISH� If you set the temperature dial to a lower setting after you have
ironed at a high temperature, let the iron cool down for five minutes
General description (fig. 1).before you start ironing again.
ATemperature dialCleaning and maintenance.
BTemperature light (HI114/HI108 only)
1 Remove the mains plug from the wall socket and let the iron cool
C Mains corddown.
D Cord clip
E Heel2 Wipe the soleplate with a damp cloth and a non-abrasive (liquid)
FType platecleaner.
G SoleplateKeep the soleplate smooth: avoid hard contact with metal objects.
Important.3 Clean the upper part of the appliance with a damp cloth.
Read these instructions for use carefully before using the appliance and saveStorage.
them for future reference.1 Remove the mains plug from the wall socket.
� Check if the voltage indicated on the type plate corresponds to the
local mains voltage before you connect the appliance.2 Wind the mains cord round the cord storage facility (fig. 4).
� Only connect the appliance to an earthed wall socket.3 Fix the cord with the cord clip (fig. 5).
� Do not use the appliance if the plug, the cord or the appliance itself
shows visible damage, or if the appliance has been dropped.4 Always store the iron standing on its heel in a safe and dry place
(fig. 6).
� Check the cord regularly for possible damage.
� If the mains cord is damaged, it must be replaced by Philips, a serviceEnvironment.
centre authorised by Philips or similarly qualified persons in order to� Do not throw the appliance away with the normal household waste
avoid a hazard.
� Never leave the appliance unattended when it is connected to theat the end of its life, but hand it in at an official collection point for
recycling. By doing this you will help to preserve the environment
mains.(fig. 7).
� Keep the appliance out of the reach of children.
� The soleplate of the iron can become extremely hot and may causeGuarantee & service.
burns if touched.
� Do not allow the cord to come into contact with the soleplate whenIf you need information or if you have a problem, please visit the Philips
website at www.philips.com or contact the Philips Customer Care Centre
it is hot.in your country (you will find its phone number in the worldwide guarantee
� When you have finished ironing, when you clean the appliance and
also when you leave the iron even for a short while: put the iron onleaflet). If there is no Customer Care Centre in your country, turn to your
local Philips dealer or contact the Service Department of Philips Domestic
its heel and remove the mains plug from the wall socket.
� Always place and use the iron and the stand, if provided, on a stable,Appliances and Personal Care BV.
level and horizontal surface.Frequently asked questions.
� This appliance is intended for household use only.
This chapter lists the questions most frequently asked about the appliance. If
Before first use.you can't find the answer to you question, please contact the Customer
Care Centre in your country.
1 Remove any sticker or protective foil from the soleplate and clean
the soleplate with a soft cloth.QuestionAnswer
The iron may give off some smoke when you use it for the first time.ThisWhy does the soleplate stayThere may be a connection problem. Check the
will cease after a short while.cold, even though I have plugged mains cord, the plug and the wall socket.
the iron in?
Preparing for use.
The temperature dial may be set to MIN. Set the
temperature dial to the required ironing
Setting the temperaturetemperature (see section 'Setting the
temperature').
1 Put the iron on its heel.
2 Set the temperature dial to the required ironing temperature (fig. 2).1
ABCD
- Check the laundry care label for the required ironing temperature:
- 1 Synthetic fabrics (e.g. acrylic, viscose, polyamide, polyester)
- 1 Silk
- 2 Wool
- 3 Cotton, linen
- If you do not know what kind or kinds of fabric the article is made of,
determine the appropriate ironing temperature by ironing a spot that
will not be visible when you wear or use the article. Start at a relatively
low temperature and gradually increase the temperature until you
obtain the required ironing result.
- Silk, woollen and synthetic materials: iron the reverse side of the fabric
to prevent shiny patches.
- Start ironing the articles that require the lowest ironing temperature,
such as those made of synthetic fibres.
3 Put the mains plug in an earthed wall socket.
HI114/HI108: the temperature light goes on.GFE
Using the appliance.2345
1 Set the temperature dial to the recommended position.
See chapter 'Preparing for use'.
2 HI105: let the iron to heat up for two minutes before you start
ironing.
3 HI114/HI108: the temperature light goes on to indicate that the iron
is heating up (fig. 3).67
Start ironing when the temperature light has first gone out and then goes
on again.
The temperature light will go on from time to time during ironing. |
ACEC
PHILIPS
