Setting the Bass TypeChanging Audio Level Display
Pattern
This function allows for 3 different Bass type
settings. Select the one that appeals to you the(CDM-9807RB/CDM-9805R only)
most.
1Press the DISP button to switch the display
pattern.
1Press and hold the CENTER f button for at least
? DISP1 ? DISP2 ? DISP OFF
2 seconds to set the Bass type.
DISP1:
2Select the desired TYPE (1 through 3) by
Lights the Volume indicator.
pressing the g or f button within 15
seconds.DISP2:
Type 1 will sound best if you have a subwoofer inLights the mode and value bars to show the
settings in the Bass engine display.
your system. Use Type 2 or 3 if you are using
small diameter speakers.
DISP OFF:
Turns off the light in Audio Level display.FR
3Press the CENTER f button for at least 2
If you set DISP OFF, the Volume indicator and
seconds to return to the normal mode.
Bass engine displays are not lit at all times.
NOTES
" OBass Center Frequency� and OBass Band Width�
previously set are replaced when selecting TYPE 1Changing Audio Level Display
through 3. When Bass Type is OFF, your previous
settings are restored.Pattern
" If you connect an external audio processor, the setting
(CDM-9803RM/CDM-9803R/cannot be carried out.
ES
CDE-9802RB/CDE-9801R only)
Blackout Mode On and Off
1Press and hold the F/SETUP button for at least
(CDM-9807RB only)3 seconds.
When the Blackout mode is turned on, the display2Press the g or f button to select DISP.
will turn off to reduce power consumption.
3Press the BAND button to switch the display
This additional power enhances the sound
pattern.DE
quality.
? DISP1 ? DISP2 ? DISP OFF
1Press and hold the DISP/B.OUT button for at
DISP1:
least 3 seconds to start the blackout mode. By
Lights the Volume indicator.
doing so the display will turn off.
DISP2:
NOTE
Lights the mode and value bars to show the
If any button on the unit is pressed during the blackout
settings in the Bass engine display.
mode, the function will be displayed for 5 seconds to
show the operation before returning to Blackout mode.DISP OFF:IT
Turns off the light in Audio Level display.
To cancel the blackout mode, press and hold the
If you set DISP OFF, the Volume indicator and
DISP/B.OUT button for at least 3 seconds.
Bass engine displays are not lit at all times.
4When the setting is completed, press the
F/SETUP button to return to the normal mode.
SE
7-EN |