Livance GDP 31Service- und Sonder-Funktionen / Service and Special Functions
Service and Special Functions
Software Upgrade
Attention: if a failure should occur during the software upgrade2.2 Retailer service menu
(e.g. a mains failure), it may happen that the unit's function and a� Call up the "Service menu" (Point 2).
restart of the upgrade function are no longer possible. If this� Call up the "Retailer Service" menu using the 2 button,
should be the case, you must replace the integrated FLASH ICor use the S / A buttons and confirm with the OK button.
(U15) with a preprogrammed IC (see corresponding spare parts� Enter the digits "8 5 0 0".
list).Note: the further menus can be called up according to the menu
� Insert the upgrade CD (see corresponding spare parts list) andoverview (Point 3).
observe the hints on the display and on the screen of the TV set.
2.2.1 System settings
Warranty / costs
� System messages
We expressly point out that only operating software authorized by
When selecting a function or in the case of an error (e.g. disc,
GRUNDIG is allowed. If a failure is caused by an operating software
handling or unit error), the system emits messages which are briefly
which has been downloaded from not authorized sources, indepen-
displayed in the bottom area of the picture screen.
dent of its origin, or a modified software, this represents an outside
interference. An outside interference leads to the expiration of any� Demo
warranty claims. For this reason, GRUNDIG is obliged to generallyWhen the demo function is activated, the eject button and the on/off
refuse any payment due to such infringements. In such cases, theswitch are locked.
repair costs are at the charge of the retailer or the final customer, evenEnding the demo function:
within the period of warranty.� press the 7 button.
� press the y button.
2.2.4 Video special
Initialization of the Set
� Format conversion
Press the 7 / 8 buttons on the set at the same time and connect the
set to the mains. This resets the software of the set to the factoryThe following format conversions are possible:
� Centre
presettings. The basic settings are loaded and the customer-specific
data is cleared.� Auto
� 525 lines only
� 625 lines only
Service Menu� Video signal
The Service menu is subdivided into the freely accessible "SystemY DAC enable
information" menu and the password-protected "Dealer service menu".The following digital-to-analog converters can be activated/deac-
tivated:
1. Functions of the buttons
� DAC1 = Green/Y signal
For navigating in the Service menu, the buttons on the remote control� DAC2 = Blue/C signal
are used.� DAC3 = Red signal (indication of the active switching state)
iCall up the Player menu / End the menu functions.
S / A Select menu functions.Y NTSC format (60Hz format)
aSelect higher menu function.The following 60Hz formats can be selected:
sActivate menu function.� 525 lines, NTSC standard
OKActivate menu function.� 525 lines, M-PAL standard
xSelect higher menu function.Y NTSC composite signal
1�9Activate menu function directly.
The following NTSC composite signal formats can be selected:
yExit demo function in stop mode.� NTSC USA
2. Calling up the Service menu� NTSC Japan
� NTSC Other
� Call up the "Player Menu" using the i button.
� Select "Installation" using the 5 button,Y PAL format
or use the S / A buttons and confirm with the OK button.The following PAL formats can be selected:
� Select "Additional functions" using the 4 button,� PAL BDGHI
or use the S / A buttons and confirm with the OK button.� PAL N
� Select the "Service Menu" using the 2 button,� PAL N-Combo
or use the S / A buttons and confirm with the OK button.
The Service menu is subdivided in sub-menus according to the menu
overview (Point 3).
2.1 System information
� Call up the "Service menu" (Point 2).
� Select "System information" using the 1 button,
or use the S / A buttons and confirm with the OK button.
The System information menu appears on the picture screen.
System information
GDP 3100
UnitSW-Version: 0.79 / 258 Oct 17 2001
Software version
HW-Version: 0.03
Hardware version
Copyright: GRUNDIG AG 2001
Hardware informationhttp://www.grundig.com
NDV8602/DVD-5/Pantera-II LE rev 1 R:2
Regional code
select
exit
and choose
back
GRUNDIG Service2 - 3 |
ACEC
