AV-21PX
Measuring
Item Test point Adjustment partDescription
instrument
Adjustment l Signal1. CUTOFF (R)1. Receive a black and white signal (colour off).
of WHITEgenerator CUTOFF (G)2. Select 2. V/C from the SERVICE MENU.
BALANCE CUTOFF (B)3. Select 1. CUTOFF (R), (G) and (B) with MENU a key, and
(Low light)l Remoteset each value to initial setting value with 4 ~ 9 keys on the
control SCREEN VRremote control unit.
unit (In HVT)4. Press the 1 key on the remote control unit to produce a single
horizontal line.
5. Turn the SCREEN VR fully counterclockwise, then slowly turn
it clockwise to where a red, blue, or green colour is faintly vis-
V/C 50HzPAL
ible.
1. CUTOFF(R) ] ]]6. Use keys 4 ~ 9 on the remote control unit and adjust the other
(G) ] ]]
2 colours to where the single horizontal line appears white.
(B) ] ]]
7. Turn the SCREEN VR to where the single horizontal line glows
faintly.
a : SELECT
8. Press the 2 key to return to 1. CUTOFF screen.
- / + : OPERATEDISP : EXIT
9. Press the DISPLAY key twice to return to the normal screen.
Setting (Adjustment)VariableInitial setting
item range value
REMOTE CONTROL UNIT
R-128 ~ +127 0
H.LINE OFF
1. CUT OFFG-128 ~ +127 0
123
H.LINE ONB-128 ~ +127 0
G. CUTOFF ( )
456
R. CUTOFF ( )B. CUTOFF ( )
R. DRIVE ( )B. DRIVE ( )
789
R. CUTOFF ( )B. CUTOFF ( )
R. DRIVE ( )B. DRIVE ( )
G. CUTOFF ( )
Adjustment l Signal2. DRIVE (R)1. Receive a black and white signal (colour off).
of WHITEgenerator DRIVE (B)2. Select 2. V/C from the SERVICE MENU.
BALANCE3. Select 2. DRIVE (R) / (B) with MENU a key, and set each
(High light)l Remotevalue to initial setting value with 4 and 7 keys, or 6 and 9 keys
controlon the remote control unit.
unit4. Use the keys 4 and 7 or 6 and 9 to produce a white screen.
5. Press the DISPLAY key twice to return to the normal screen.
V/C 50HzPALSetting (Adjustment)VariableInitial setting
item range value
2. DRIVE(R) ] ]]
(B) ] ]]R-128 ~ +127 0
2. DRIVE
B-128 ~ +127 0
a : SELECT
- / + : OPERATEDISP : EXIT
No. 5603916 |