AV-32R370KE
AV-32T67SKE
AV-32T35SPE
2.5 MEMORY IC REPLACEMENT
2.5.1 MEMORY IC
This TV use memory IC.
In the memory IC, there are memorized data for correctly operating for the video and deflection circuits.
When replacing the memory IC, be sure to use IC written with the initial values of data.
2.5.2 PROCEDURE FOR REPLACING MEMORY IC
PROCEDURE
SERVICE MENU
1. Power off2. V/C
1. IF
Turn the power off and unplug the power plug.3. AUDIO4. DEF
5. VSM PRESET6. VPS
7. SHIPPING(OFF)
2. Replace IC.
1-7 : SELECT i : EXIT
Be sure to use a memory IC written with the initial setting data.
Fig.1
3. Power on
Connect the power plug and turn the power on.
SYSTEM CONSTANT SET
MODEL=JL_EURO(#.####)
1. DESINATION : EK
4. Setting of receive channels
Set the receive channels. For setting, refer to the OPERATINGJVC JL EURO V00
INSTRUCTIONS.######
- + OK : STORE i : EXIT
5. User settings
Fig.2
Check the user setting items according to ?USER SETTING
VALUES (FACTORY SHIPPING)?, and if these are different, set
the correct value.
MUTING
6. Check the SYSTEM CONSTANT items
123
If the value of each item of system setup set as value peculiar to
this television is not correctly, operation of a microcomputer and456
the output of image do not become suitable. Please set up the
789
value of each item correctly, according to the following
description.0
AV
(1) Press the [INFORMATION] key and [MUTING] key on the
remote control unit simultaneously.3D
(2) The SERVICE MENU screen on Fig.1 will be displayed.INFORMATION
MENU
(3) While the SERVICE MENU is displayed, againP
TVOKOK
simultaneously press the [INFORMATION] key and
[MUTING] key. Then display the SYSTEM CONSTANT
FUNCTION
screen as shown in Fig.2.RIGHT/LEFT
FUNCTION
(4) Refer to the ?SETTING VALUES OF SYSTEMUP/DOWN
P
CONSTANT SET?, and check the setting items. Where
these differ, select the item with the [FUNCTION (UP/
DOWN)] key and adjust it with the [FUNCTION (RIGHT/
LEFT)] keys (The letter of the selected item is displayed in
yellow).
(5) Press the [OK] key to memorize the setting value.
(6) Press the [INFORMATION] key twice to return to the
normal screen.
7. SERVICE MENU setting
Verify what to set in the SERVICE MENU, and set whatever is
necessary. Refer to the ?ADJUSTMENT PROCEDURE? for
setting.
1-12 (No.52117) |