Disassembly C975, C980
Removing and Replacing the Camera Assembly
1.Remove the battery cover, battery, SIM, antenna, rear housing, endo assembly,
acoustic chamber assembly, front endo assembly as described in the
procedures.
The flexible printed cable (FPC) (flex) is easily damaged. Exercise extreme care when
Ghandling.
2.Use the disassembly tool to unseat the camera assembly flex connector from
its socket (see Figure 12).
Camera Flex Connector
Camera Assembly
040985o
Figure 12. Camera Assembly Removal
3.Carefully lift the camera assembly away from the transceiver board.
4.To replace, align the camera assembly to the transceiver board and lower the
camera assembly into the opening on the transceiver board until fully seated.
32 October 29, 2004 6809490A76-O |