CMX-3000, CU-V163
Y Test operation command
As for the following command, an operation becomes possible in the digital mode (digital mode switch of front panel is ON).
Because there is a case to damage the player when test operation command mistakes usage, be careful.
(X Speed) : In the digital mode, switch the rotation speed of the player to normal speed and double speed .
Further, sound cannot output in the double speed.
Example:
It becomes the normal speed playback setting by pressing buttons of "1" and "A" ("FUNC" and "FRAME") in order.
It becomes the double speed playback setting by pressing buttons of "2" and "A" ("FUNC" and "FRAME") in order.
* This command issues a command by stopped state in order to issue a command to servo DSP directly.
(Test/Normal Mode Change) : Switch the Test mode/Normal mode by "C-MODE" ("FUNC" and "3") buttons.
Can use only commands of 6TM from 0TM in the test mode.
(Servo All OFF) : During servo ON, turn all servo OFF when pressing "0" and "TIME" buttons in order.
(Focus ON) : During CD STOP, turn the LD ON and perform the auto focus when pressing "1" and "TIME" buttons in order.
(Spindle Kick and Tracking ON/OFF) : During tracking servo OFF, perform the spindle kick and turn the automatic adjustment
processing and tracking servo ON when pressing "2" and "TIME" buttons in order.
Also during tracking servo ON, turn the tracking servo OFF when pressing "2" and "TIME"
buttons in order.
(Tracking OFF) : During tracking servo ON, turn the tracking servo OFF when pressing "3" and "TIME" buttons in order.
(Slide FWD) : During tracking servo ON, Turn the tracking servo OFF and move the slider in the FWD direction when pressing "4"
and "TIME" buttons in order.
(Slide REV) : Turn the tracking servo OFF and move the slider in the REV direction when pressing "5" and "TIME" buttons in order
during tracking servo ON.
(SEARCH TR No. 2) : During CD STOP, perform the following operation when pressing "6" and "TIME" buttons in order.
LD ON - Auto focus - Spindle kick - automatic adjustment processing - Second tune search - Tracking
servo ON
When performed Tracking OFF, there is the case that cannot rise up in this command.
In that case please repeat once again after power OFF and ON.
* : When rise up by a step with the test mode, input a command by pressing buttons of "0", "TIME", "1", "TIME", "2" and "TIME" in
order.
State Confimation Mode in the System Operation
The mode which confirms confirmation and operating state of software version of each microcomputer by display.
Y Confirmation method of the microcomputer software version of the controller section
Load two microcomputers on the controller section.
As for the symptom of a version of each microcomputer, dot matrix is displayed for about 2 seconds while pressing each PITCH
BEND (+) button by turning the power on.
Y Confirmation method of the player section
Player section processes both players with one microcomputer.
As for the method to confirm a microcomputer version, a version is displayed by long push of CD TEXT/WAVE button and
OUT/OUT ADJ button in FL.
61 |
ACEC
