EnglishF? !
Before starting
11 Open the front cover on the machine and check 11 9
that the dust bag s-bag, and the motor-lter E )
are in place. (See also Replacement of lter)1. ( E .)
12 Open the back lid on the machine and 12 check )that
the exhaust lter is in place. 1.
13 Insert the hose until the catches click to engage 13 E E
(press the catches to release the hose). 1.( E
14 Attach the extension tubes* or telescopic tube* 1.)
1116ato the hose handle and nozzle by pushing and 14 * E * E
twisting together. (Twist and pull apart to dis- ) 0
mantle.) 1. ( ) )
15 Extend the electric cable and connect it to the 6.)
mains. The vacuum cleaner is tted with a cable 15
winder. Once the electric cable has been extend-1.
ed, it stays in that position. To rewind the cable, .
give it a slight sharp pull and then release. The , .
cable will then automatically rewind. 1,
16a Start/stop the vacuum cleaner by pushing the 1.
button. 6.
1216b16b Adjust suction power by rotating the power 16
control to the right (Max) or to the left (Min). 1.
Suction power can also be adjusted by using the 16 2 1() (
suction control on the hose handle.) 1 2 1. E
16c* If you have a vacuum cleaner with remote con- 2
trol, press the +/- buttons to adjust suction 2 .
control (be sure batteries have been inserted 16* +/-
beforehand). You can also start/stop the cleaner 2 1(
by pressing the centre of the control (as long as E ). ,
the main cleaner switch is set to on). /
( )E
* Certain models only. ).
1316c
* 5.
14
15
55 |
ACEC
