Connection to other equipment
We have 2 component signal input
jacks: Y Cb Cr and Y Pb Pr. The R / L is
Audio input for every Y Cb Cr and Y Pb Pr.
If your DVD or Set Top Box have Y Cb
Cr or Y Pb Pr output, you can connect it to
Y Cb Cr or Y Pb Pr input jack. And select to
Y Cb Cr or Y Pb Pr source input. �Some
DVD or Set Top Box need to set to Y Cb Cr
or Y Pb Pr outputA
Notice: If you see that display abnormality
in screen, you need to check the cable
connection and DVD setup.
G B R R W
INPUT CONNECTION OF PC SIGNAL(PC/DVD)
Notice: If you see that display abnormality in screen, you need to check the cable
connection and DVD setup.
Notice: The PC output can not set out of
range.The highest resolution input is
1280 X 1024 / 60Hz.
Some PC models cannot be connected to
the set.
24PIN DVI R/L INPUT 15PIN VGA R/L INPUT
Notice:If your DVD doesn?t have ? 3.5 earphone output jack,Please use cable from RCA
to? 3.5 earphone jack to connect.
1 D-SUB 15 Pin:
Connect D-SUB signal cable�VGA cableAfrom PC to D-SUB jack at the back of this display.
And connect the earphone cable from PC earphone output jack to AUDIO input jack near to the
D-SUB jack.
Setup:
Use the key Digitalin Remote Control Transmitter or MODEkey on Front panel controls
to select source to VGAstate. Then turn on the PC.
1 DVI-D:
Connect DVI-D 24 Pin signal cable�TMDS cableAfrom equipment with DVI-D jack to the
back of this display. And connect earphone cable from equipment with earphone output jack to
AUDIO input jack near the DVI-D jack.
Setup:
Use the key Digitalin Remote Control Transmitter or MODEkey on Front panel controls
to select source to DVIstate. Then turn on the equipment.
8 |
ACEC
