Before using your dishwasher for
the first time:
1. Ensure that the electrical and water connections
comply with the installation instructions
2. Remo ve all packaging from inside the appliance
3. Fill the rinse aid dispenser.
Rinse aid
Rinse aid is automatically added during the last rinse,
ensuring thorough rinsing, spot and streak free drying.
The dispenser, which is positioned inside the door,
holds about 110 ml of rinse aid, which is sufficient for
16 - 40 dishwashing programmes , depending upon the
dosage setting.
A
Filling with rinse aid
BR01
1.Open the container by turning the lid (A)
anticlockwise.
2.Add the rinse aid until the container is completely
full.The indicator (B) will be completely dark.
3.Top up the rinse aid when the indicator (B)
B
becomes clear.
x65432
ma
Ensure that the lid is closed after every refill.1
Do not put liquid detergent in the rinse aid
compartment.Clean up any rinse aid spilt during filling
BR03
with an absorbent cloth to avoid excess foaming
during the next wash.
Adjusting the dose
According to the finish and drying results obtained,
adjust the dose of rinse aid by means of the 6 position
selector (C) (position 1 minimum dosage, position 6C
maximum dosage).
Start from position 3.
x654321
ma
Gradually increase the dose if there are drops of water
or lime spots on the dishes after washing.Reduce it if
there are sticky whitish streaks on the dishes.
BR02
5 |
ACEC
