When the programmed time is up, the buzzerUse
will ring for 2 minutes unless it is switched
Current time settingoff by depressing pushbutton ). TheA (
minute minder will not switch off the oven.
The clock is preset to show the hours from 1
to 24 and the minutes from 0 to 60.The minute minder, even though signaling
When first connecting the appliance to theother functions, will always buzz for a
power supply, the numbers of the display and
maximum of 2 minutes unless interrupted
the "AUTO" pilot lamp will flash indicating
by depressing push button A().
that the clock needs to be set.
To enter the current time proceed as follows:
simultaneously depress pushbuttons A )(
Semi-automatic operation of
and B ( - ) and turn knob E as required
the oven
until the correct hour and minutes are
entered.
It is possible to start cooking immediately
The electronic clock stars when you release
and to programme the period of the cooking
pushbuttons A () and B ( - )
process.
("AUTO" pilot lamp off and lamp on).The maximum programmable cooking period
For further resetting repeat the aboveis of 23 hrs. and 59 mins.
sequence.Place the food to be cooked into the oven,
turn the function and thermostat knobs to the
desired setting and proceed as follows:
Setting the minute minder
depress pushbutton B ( - ) and,
with sound signal (buzzer)
keeping it depressed, enter the required
cooking period with knob E; when you
The minute minder can be used only with the
release pushbutton B ( - ), the
programmer set on manual operation (knob D
"AUTO" pilot lamp and lamp will
depressed).
The maximum programmable time for theremain switched on indicating that the
buzzer is 23 hrs. and 59 mins.programme is operating. At the end of the
Proceed as follows to set the minute minder:cooking process the buzzer will ring. At the
same time pilot lamp switches off anddepress knob D () ("AUTO" pilot lamp
the "AUTO" pilot lamp flashes.
switches off and lamp switches on);
Return the function and thermostat control
depress pushbutton A () and at the sameknobs to their off position, depress pushbotton
time turn knob E and set the desired timeD ( ) to switch off the "AUTO" lamp and
period.
lamp switches on.
Release pshbutton A.
11 |
ACEC
