Ignition
1. Depress and turn the control knob Before leaving
for the burner to the left to max. The pipe connections should be
flame . (Ignition position)checked for leaks with soap and
2. The ignition electrode will emit water. Do not use a naked flame
sparks, and when the mixture of gas for detecting checks.
and air is correct, the burner will be Test all burners on high and low
ignited. If it is not possible to flame for flame stability. Test the
connect the unit to mains, a stability of the low flame when any
match may be used to ignite the nearby cupboard doors are used.
burner.When satisfied with the appliance,
3. After starting the burner, press the please instruct the user on the
control knob for approx. 10 correct method of operation. If the
seconds to activate the automatic appliance fails to operate correctly
thermo-couple (thermo sensor after all checks have been made,
ready).refer to the authorised service
5. The burner can now be regulated provider in your area.
between maximum and minimum
The units externally
measured length
145 mm:
Cooker hood
290 mm:
Two-zone ceramic-top electric hob
Two-burner gas hob
Grill
Fryer
Wok
580 mm:
Four-zone ceramic-top electric hob
Four-burner gas hob.
725 mm:
Four-zone ceramic-top electric hob.
169 |
ACEC
