5.4 Cooking with the Spit
lScrew the Removable Handle onto the Spit
lSlide the Fork onto the Spit, followed by the joint to
be roasted, taking care that it is properly centred.
lSlide the second Fork onto the Spit,
lLock the forks in position with the screws.
lFit the Spit support on the relevant hinge, as shown
in the diagram.
lPush the end of the spit into the square motor drive
hole (the orifice in the wall at the back of the oven)
and place the front of the spit on the relevant support,
as shown in the diagram.
lUnscrew the spit handle.
lSlide the dish support grill into slot 1, then place the
drip tray on top.
lInstall the protective screen.
lClose the door, leaving it slightly ajar.
lSet the oven/grill Control Knob to the position.
lPress the button.
lCheck that the spit is turning.
To remove the spit roast:
lSwitch off the grill.
lStop the spit by pressing the button.
lRemove the protective screen.
lScrew the Removable Handle onto the Spit
lRemove the spit from the oven.
lRemove the spit support.
Both during use and after using the grill, the
Protective Screen becomes hot.
9191 |
ACEC
