b)Setting electronicallyFilling with salt
(The dishwasher must be switched off)
Only use salt specifically designed for use in
The dishwasher is factory set at level 5. dishwashers.
All other types of salt not specifically designed for use in
1. Press the On/Off push button. The On/Off indicator light a dishwasher, especially table salt, will damage the water
illuminates.softener.
If other indicator lights are on, this means that a wash Only fill with salt just before starting one of the complete
programme has been selected. The programme must be washing programmes.
cancelled: press simultaneously the function push buttons This will prevent any grains of salt or salty water, which
2and 3for about 2 seconds. All the indicator lights will may have been spilt, remaining on the bottom of the
turn off (except for the On/Off indicator light).machine for any period of time, which may cause
corrosion.
2.Press simultaneously function push buttons 2 and 3, until
the indicator lights of the function push buttons 1, 2 and 3
start flashing.To fill:
3.Press the function push button 1, the indicator lights of 1.Open the door, remove the lower basket and unscrew the
function push buttons 2 and 3 turn off while the indicator cap of the salt container by turning it anticlockwise.
light of the push button 1 goes on flashing, the digital
2.Pour 1 litre of water inside the container (this is necessary
display indicates the current level.
only before filling with salt for the first time).
4.To change the level, press push button 1. Each time the 3.Using the funnel provided,
push button is pressed the level changes. (For the selection pour in the salt until the SALE
ZOUT
of the new level see the chart).container is full.SALT
SALZ
Examples:4.Replace the cap making SEL
if the current level is 5, by pressing push button 1 once, sure that there is no trace
level 6 is selected.of salt on the screw
if the current level is 10, by pressing push button 1 once, thread or on the gasket.
level 1 is selected.
5.Screw on the cap tightly
5.To memorise the operation, switch off the dishwasher by turning it clockwise until it
pressing the On/Off push button or wait about 60 seconds stops with a click.SR14
after which the dishwasher will automatically return to
setting mode.The salt container will require topping up periodically.
The salt indicator lighton the control panel will come on
when the salt has finished.
The salt indicator light on the control panel can remain
illuminated for 2-6 hours after the salt has been
replenished, assuming the dishwasher remains switched
on. If you are using salts that take longer to dissolve then
this can take longer. The function of the machine is not
affected.
Do not worry if water over flows from the unit when filling with
salt, this is quite normal.
8 |
ACEC
