Rinse aid
Rinse aid is automatically added during the last rinse,
ensuring thorough rinsing, spot and streak free drying.
The dispenser, which is positioned inside the door, holds
about 110 ml of rinse aid, which is sufficient for 16 - 40
dishwashing programmes, depending upon the dosage
setting.
Filling with Rinse Aid:
1. Open the container by turning the lid (A)
anticlockwise.
A
2. Add the rinse aid until the container is
completely full (approx. 110 ml). The indicator BR01
(B) will be completely dark.
3. Top up the rinse aid when the indicator (B)
becomes clear.
Ensure that the lid is closed after everyB
refill.
ax6543
m21
Do not put liquid detergent in the rinse aid department.
Clean up any rinse aid spilt during filling with an
absorbent cloth to avoid excess foaming during the next
BR03
wash.
Adjusting the dose
According to the finish and drying results obtained,
adjust the dose of rinse aid by means of the 6 position
C
selector (C) (position 1 minimum dosage, position 6
maximum dosage). (Start from position 3). Gradually
increase the dose if there are drops of water or limeax6543
m21
spots on the dishes after washing. Reduce it if there are
sticky whitish streaks on the dishes.
BR02
8PFR01UK |