4. Select the desired programme
Operating sequenceTurn the programme selector dial to the desired
position.ENGLISH
Before the first wash we recommend that you pour 2
litres of water into the main wash compartment
of the detergent drawer in order to activate the
-(+
ECO valve. Then run the cotton cycle 90°C, with the-
,,
machine empty, in order to remove any(
-
manufacturing residue from the drum and tub.
Pour half a measure of detergent into the main wash'
(+,,(+
compartment and start up the machine.,-.
1. Place the laundry in the drum
The light corresponding to the max spin speed for
Open the door.
the selected programme illuminates and the light of
Place the laundry in the drum, one item at a time,the ?Start/Pause? button starts to flash.
shaking them out as much as possible.
Close the door.
5. Select the required option(s)
The light corresponding to the depressed button
illuminates.
2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure
out the amount of detergent recommended by the
6. Reduce eventually the spin speed
manufacturer in a graduated cup and pour it into the
Press the ?Spin Reduction? button repeatedly to
main wash compartment .
reduce the spin speed.
If you wish to carry out the prewash, pour detergent
The relevant light illuminates.
into the appropriate compartment marked .
3. Measure out the additive$%"!""
#""
If required, pour fabric softener into the compartment
marked , without exceeding the ?MAX? mark.%""
+
&
15 |
ACEC
