SETTING THE REMOTE (CONTINUED)
AUTO SEARCH
Automatically search through the remote codes to find the appropriate code as follows:
12
2
1
Turn on the power to the desired deviceWhile aiming the remote at the device,
you want to control and press thepress and hold the SET v and Power w
respective Device button (i.e. TV).buttons simultaneously for four seconds
until the red indicator lights, then release
the buttons. Auto Search will now be
performed.
3
When the device turns off, the remote is
now programmed properly. Press any
button to exit the Auto search mode and
the red indicator will go off. Make sure all
functions operate (channel, volume, etc.).
If they do not, repeats steps above.
4 |
ACEC
