MAINTENANCEGB
Unplug the appliance before carrying outInterior light
any maintenance operation.
The light inside the refrigerator compartment is
Warningeasy to get at through the opening in the light
holder. If the light does not go on when the door
This appliance contains hydrocarbons in its
cooling unit maintenance and recharging mustis open, check that it is screwed into place
therefore only be carried out by authorizedproperly. If it still does not light up, change the
technicians.bulb.
Internal clearingThe rating is shown on the light bulb cover.
Never use metal objects for clearing your
appliance as it may get damaged.
When performing a complete defrosting, wash
the internal surfaces of the freezer with
lukewarm water and bicarbonate; rinse and
then accurately dry.
External clearingFig 16
Wash the outer body with lukewarm water and
soap. Periodically use a clearing polish to keep
the outer body shining. Dust the condenser
located behind the freezer with a soft brush or a
vacuum cleaner. An excessive accumulation of
dust might compromise the freezerOs efficiency.
Extended periods of non-operation
Whenever the freezer is not to be used for an
extended period of time, disconnect it from the
wall socket and empty and clean the freezer.D731
Remember to leave the door open for the entire
period of time in which the freezer is not to be
used.
DEFECTIVE OPERATIONGB
Before calling your local dealer for servicing
assistance, check the following points to see ifIf defective operation continues after these
you may not resolve the problem yourself:controls, call your local Service Network and
provide all the data listed on the rating plate:
Make sure that the freezer is plugged into themodel, serial number, etc.
wall socket correctly, and that electrical current
arrives to the freezer without interruption.
Control the thermostat setting.
In the event that the freezer makes excessive
noise or vibration, make sure that it is not in
direct contact with the wall or adjacent furniture.
42 |
ACEC
