TROUBLESHOOTING GUIDE
The appliance will not switch on. Siphon clogged?
Power plug properly inserted in mains Remove the siphon and clean it under
socket?running water.
Mains fuse OK? Not enough water delivered? (See above
Power failure?paragraph ?No water or insufficient water
supply?).
Tap turned on? Is water coming through? Also see ?Detergent and Additiv? andes
Door closed?
Programme selected??Care and Maintenan?.ce
Appliance switched on?Machine vibrates during spin cycle.
Machine perfectly horizontal with all four feet
No water or insufficient water supply.
Tap turned on completely?on ground? (See ?Installat?). ion
Transit screws and bar removed? The transit
Kink in water hose?screws and bar must be removed before the
Water hose filter clogged??Care and (See
machine is used (see ?Installati?).on
Maintenance?).
Water hose frozen up?Final spin results are poor.
Pump impeller obstructed? (See ?Removing
Waste water not pumped out.
the filter?/?Draining residual water?).
Drain hose installed correctly? (See
?Installation?).Washing results are poor.
Filter clogged? (See?Remov ing the filter?/ Make sure to meet exactly the starting point
?Draining residual water?).of the programme, otherwise the first part of
Drain hose frozen up?the programme will not be executed (and this
Is the rinse hold button pressed?will reduce water filling, heating and
If yes, press the rinse hold button again anwashing).d
the programme will continue with draining
and spinning.Machine does not spin.
Is the no spin button pressed?
Detergent and additive product residues in If yes, press the no spin button again and the
detergent drawer at end of wash. programme will continue with spinning.
Siphon installed correctly?
The siphon must be pushed down until the
stoppers are in touch.
AFTER-SALES SERVICE
Before contacting After-Sales Service:
1. Try to remedy the problem
(see ?TroubleShooting Gu?).ide
2. Restart the programme to see if the fault is
repeated.
3. If the malfunction persists, call After-Sales
Service and specify:
The nature of the problem.
The After-Sales Service sticker is on the inside
The exact model of the appliance.
The service code of the door.
(number after the word SERVICE).
Your full address.
Your telephone number and area code.
The After-Sales Service telephone number
and address can be found in the warranty or
on application to the retailer.
27 |
ACEC
