TH-S33-11[C].book Page 19 Thursday, March 31, 2005 8:02 PM
See page 18 for button locations.
Advanced operations
7 All Channel Stereo7 When playing back 2 channel source
All Channel Stereo (ALL ST) mode can reproduce a larger stereo You can select either mode of Dolby Pro Logic II (MOVIE/
sound field using all the connected (and activated) speakers.MUSIC) or the DSP (ALL ST) mode.
EnglishAll Channel Stereo can be used while reproducing 2 channel stereo
Press SURROUND repeatedly to select the
source.
desired mode.
Normal stereo soundAll Channel Stereo
The surround mode is turned on and the current surround mode
appears on the display window.
Each time you press the button, the surround mode changes.
For details on each mode, see page 18.
To turn off the surround mode
Press SURROUND repeatedly until ?SURR
OFF? appears on the display window.
7 Indicators on the display window
Storing adjustments ? auto memory
Digital signal format indicators
LPCM, SURR:Lights when Linear PCM signal comes in.When you turn the power off, the system memorizes the current
GD, SURR:Lights when Dolby Digital signals come in.surround mode. The memorized mode is automatically recalled
C, SURR:Lights when DTS Digital (Surround) signals when you turn the power on.
come in.
No indication:No digital signal indicator lights when analog
Using the on-screen bar
signals come in.
Dolby Surround mode indicatorsYou can check disc information and you can use some functions
GPLII: Lights when Dolby Pro Logic II mode is activated.using the on-screen bar.
Source signal indicators, etc.
Light to indicate the incoming signals.Showing the on-screen bar
a: Lights when the front left channel signal
comes in.7 Whenever a disc is loaded
b: Lights when the center channel signal comes in.
c: Lights when the front right channel signal comes in.
Press ON SCREEN.
d: Lights when the LFE channel signal comes in.
g: Lights when the surround left channel signal comes in.Each time you press the button, the on-
i: Lights when the surround right channel signal comes in.screen bar changes as follows on the TV
h: Lights when the monaural surround channel signal or 2 screen.
channel Dolby Surround signal comes in.Example:
SW : Always lights.During DVD VIDEO playback
The channel with ?? shows that the corresponding speakers are
reproducing the channels? sound.
If the channels? sound decoded into 5.1 channel is reproduced, only
?? lights.
Selecting the surround mode
The system is set up to automatically select the optimal surround OFF
(The on-screen bar disappears)
mode for input signal from digital multichannel software.
When playing back 2 channel source, you can select the desired
surround mode manually.(back to the beginning)
NOTE? The currently selected item shows green.
? This function also takes effect for the sources other than DVD.
? For FM/AM and AUX, you can select All Channel Stereo (ALL ST)
or SURR OFF.
7 When playing back digital multichannel software
(except during SURR OFF mode)
The appropriate multichannel surround mode (Dolby Digital, DTS
Digital Surround or Linear PCM) is automatically selected.
19 |
ACEC
