74 ENUSER MAINTENANCE
After UseCleaning The Camcorder
1Turn off the camcorder.1To clean the exterior, wipe gently with a soft cloth.
Put the cloth in diluted mild soap and wring it well to
2Slide and hold OPEN/EJECT in the direction of
wipe off heavy dirt. Then wipe again with a dry cloth.
the arrow, then pull the cassette holder cover open
until it locks. The cassette holder opens automatically.2Press PUSH OPEN and open the LCD monitor.
Remove the cassette.Wipe gently with a soft cloth. Be careful not to
damage the monitor. Close the LCD monitor.
3Press OPUSH HERE� to close the cassette holder.
Y Once the cassette holder is closed, it recedes3To clean the lens, blow it with a blower brush,
automatically. Wait until it recedes completely beforethen wipe gently with lens cleaning paper.
closing the cassette holder cover.
4To clean the viewfinder, raise it to the vertical
4Tilt the viewfinder upward 1. Press BATT.position. Open the viewfinder cleaning hatch in the
RELEASE 2 and remove the battery pack 3 .direction of the arrow 1 .
5Insert a lens blower or soft cloth into the gap at
the bottom of the viewfinder and clean the interior of
the viewfinder with it 2 .
6Close the hatch. Tilt the viewfinder back to the
horizontal position.
NOTES:
Remove.I Avoid using strong cleaning agents such as benzine or
alcohol.
I Cleaning should be done only after the battery pack
Cassette holder
has been removed or other power units have been
disconnected.
I Mould may form if the lens is left dirty.
I When using a cleaner or chemically treated cloth refer
to the cautions of each product.
OPEN/EJECT
Switch
Cassette holder cover
PUSH HERE
BATT. RELEASE Button
1
12
HatchLens blower
3
2 |
ACEC
