TrackingCounter Memory
Eliminates noise bars that appear on-screen duringMakes it easier to locate a specific tape segment.
playback. To activate Manual Tracking:1) Press COUNTER R/M q and hold for more than
1) Press the TRACKING Wheel 1 for approx.1 second. The counter t resets to O0:00:00�.
2 seconds. OMT� i appears.2) Press COUNTER R/M q for less than 1 second.
2) Rotate the TRACKING Wheel 1 so that theOM� appears.
noise bars disappear.3) After recording or playback, press 5 e, then
YTo return to Auto Tracking, press the TRACKING2 w. The tape automatically stops at or close
Wheel 1 for approx. 2 seconds or set the Powerto 0:00:00.
Switch @ to OOFF� and then O� again. OAT� i4) Press 4/6 ^ to start playback.
blinks. When Auto Tracking finishes, the indicationYThe counter memory functions in the Fast-
disappears.Forward and Rewind modes.
YWhen noise bars appear during playback, theYTo disable the counter memory function, press
camcorder enters the Auto Tracking mode andCOUNTER R/M q for less than 1 second so that
OAT� i appears.OM� disappears.
YManual Tracking may not work with tapes
recorded on other VCRs or camcorders.
TBC (Time Base Corrector)
Removes jitter from fluctuating video signals to
deliver a stable picture even with old tapes.
To activate/release the TBC mode, press TBC 4
during playback for more than 1 second. When the
TBC mode is activated, OTBC� e is displayed.
YThe OTBC� indicator e turns green (grey with a
camcorder equipped with a black/white
viewfinder) while TBC is working, and white while
TBC is not operative.
YTBC does not work during Still Playback and
Shuttle Search ( pg. 11).
YIt may take a few seconds before TBC actually
starts working.
YThe picture may be distorted if the TBC mode is
activated or deactivated at the edit-in/-out points
or when normal playback resumes after Still
Playback or Shuttle Search ( pg. 11).
YIf the playback picture is distorted when TBC is
set to on, turn off TBC.
14
1 GR-SXM195AS_EN_Japan1403.01.24, 9:20 AM |
ACEC
