%53
@&OCPPL 1BHF 8FEOFTEBZ
+VMZ
".
Advanced Setup�Continued
 c. SurrBack ModeL+R:Both the left and right channels are output
This setting determines which surround mode is used for (default).
Dolby Digital input signals that don�t contain a Dolby Left:Only the left channel is output.
Digital EX �ag, or when the b. Dolby EX setting is set to Right:Only the right channel is output.
Manual. This setting is unavailable if no surround back
speakers are connected. b. Surround Mode
This setting determines the default surround mode for
You can select PLIIx Movie (default), PLIIx Music, or digital input signals, Dolby Digital and so on, with only
Dolby D, or Dolby D EX.
2 channels (2/0). This setting is unavailable if no center
� If only one surround back speaker is connected, PLIIx and surround speakers are connected.
Movie is unavailable.
You can select PLIIx Movie (default), PLIIx Music,
 d. THX Mode (DTR-6.5 only)PLIIx Game, Neo:6 Cinema, or Neo:6 Music.
This setting determines which surround mode is used
If you�re not using any surround back speakers, �PLIIx�
when THX is used with Dolby Digital input signals. This
setting is unavailable if no surround back speakers are will be �PLII.�
If you�re not using any surround speakers, Neo:6 Music
connected.cannot be selected.
You can select THX SurrEX (default), PLIIx+THX, or
THX Cinema.
3-5. Multiplex
� If only one surround back speaker is connected,
PLIIx+THX is unavailable.This setting applies to multiplex input signals.
3-3. DTSÂ a. Input Channel
This setting determines which channel is output from a
These settings apply to DTS input signals.stereo multiplex source. Use it to select audio channels
 a. LFE Levelor languages with multiplex sources, multilanguage TV
broadcasts, and so on.
With this setting you can set the level of the LFE (Low
Frequency Effects) channel for DTS sources to � , Main:The main channel is output (default).
�10 dB, or 0 dB (default).Sub:The sub channel is output.
If you Ţnd that the low-frequency effects are too loud Main/Sub:Both the main and sub channels are output.
when playing DTS sources, set this to �10 dB or � dB.
3-6. Multichannel Input
 b. SurrBack Mode
This setting determines which surround mode is used for These settings apply to the analog multichannel input.
DTS input signals that are not DTS-ES. (The handling of
DTS-ES input signals is determined automatically.) This  a. Subwoofer Sensitivity
When using the DVD analog multichannel input, the
setting is unavailable if no surround back speakers are loudness of the connected subwoofer also depends on
connected.
the component that�s connected to that input. If you Ţnd
You can select DTS+Neo:6 (default), Dolby EX, PLIIx that it�s too loud, set this to 0 dB, +5 dB, +10 dB, or
Movie, PLIIx Music, or DTS.+15 dB. The default setting is 0 dB.
� If only one surround back speaker is connected, PLIIx  b. SurrBack Mode (DTR-6.5 only)
Movie is unavailable.
If you�re using surround back speakers, this setting
 c. THX Mode (DTR-6.5 only)determines which surround mode is used with analog
This setting determines which surround mode is used multichannel input signals. This setting is unavailable if
when THX is used with DTS input signals. This setting no surround back speakers are connected.
is unavailable if no surround back speakers are con-You can select Dolby EX, PLIIx Movie (default), PLIIx
nected.Music, or Multich (straight 5.1-channel playback).
You can select THX SurrEX, Neo:6+THX (default), � If only one surround back speaker is connected, PLIIx
PLIIx+THX, or THX Cinema.Movie is unavailable.
� If only one surround back speaker is connected,
PLIIx+THX is unavailable. c. THX Mode (DTR-6.5 only)
This setting determines which surround mode is used
3-4. D.F. 2chwhen THX is used with analog multichannel input sig-
nals. This setting is unavailable if no surround back
These settings apply to digital input signals, Dolby Dig-speakers are connected.
ital and so on, with only 2 channels (2/0).You can select THX SurrEX (default), PLIIx+THX, or
THX Cinema.
 a. Input Channel (Mono)
This setting determines which channel is output when � If only one surround back speaker is connected,
the Mono listening mode is used with a stereo source.PLIIx+THX is unavailable.
67 |
ACEC
