T0006UG_6006UG_EN_1.qx3 04.5.12 10:09 AM Page 10
10 Optional Connections
Digital Stereo Hookups
You can connect the TV/VCR/DVD to a Stereo
that has a Digital Coaxial In jack. Use this
hookup if you want to hear the TV/VCR/DVD
sound through the Stereo instead. Use theseTo AUDIO OUT
connections for a Dolby Digital-compatibleCOAXIAL jack
Stereo or for a Receiver that has a Mini-Disc oron TV/VCR/DVD
Digital Audio Tape deck.
ANT.AUDIO OUTCOAXIAL
Connect the antenna/Cable TV
signal. Details are on pages eight-nine.
1
AUDIO OUT
Connect a digital audio coaxialCOAXIAL
cable (not supplied) to the AUDIO
2
OUT COAXIAL jack on the
TV/VCR/DVD.
Also connect the cable to the
StereoOs COAXIAL DIGITAL
AUDIO IN jack.
To StereoOs COAXIAL
If the Stereo is Dolby Digital-com-DIGITAL AUDIO IN jack
patible, set DOLBY DIGITAL to
3
ON. If the Stereo is not Dolby Digital-
compatible or if you connected to a
Mini-Disc or Digital Audio Tape Deck,
set DOLBY DIGITAL to OFF. Details are
on page 72.
An incorrect setting causes noise distor-
tion and damages speakers.
To see if your Stereo has Dolby Digital,
look for a Dolby Digital logo on your
Stereo. Or, refer to the Stereo ownerOs
manual.
Helpful Hints
Y You cannot use a Mini-Disc or
Digital Audio Tape deck to copy
Dolby Digital 5.1channel sur-
round sound Discs.
Y Discs recorded in Dolby Digital
should show this on the Disc or
case.If the Disc is not recorded
in Dolby Digital 5.1channel sur-
round sound,you will not hear
multi-channel sound even if you
use the Digital Stereo hookup. |
ACEC
