Camera & camcorder
&Connect your camera or camcorder to sockets at the right side of your TV.
AUDIOéConnect the equipment to VIDEO2and AUDIO L3for mono
VIDEOequipment.
SYVIDEO
Press the X key repeatedly to select the sound coming from one or
both loudspeakers of your TV.
1
2
3 For stereo equipment also connect AUDIO R3.
S-VHS quality with an S-VHS camcorder is obtained by connecting the S-VHS
cables with the S-VIDEO input 1 and AUDIO inputs 3.
Digital equipment (DVD, digital satellite tuner,...)
EXTERNALConnect your digital equipment with a eurocable 1 to one of the
1/2/3euroconnectors (EXT1,EXT2 or EXT3), or with a cinch cable to the VIDEO
input at the right side of the TV (see illustration above).
&Press Uand hat the same time.
1
INSTALLATION
SETUP
Menu language
CountryDigital Sources
JDigital sources
Decoder/Descrambler
Automatic installationPicture tilt
DVD
Manual installationInformation line
Give nameFactory settings
ReshuffleExtra front speakers
Favourite programmesAuto Surround
Auto formatyes/no
J SETUPSETUPINSTALLATION
éSelect Digital sourcesin the Setup menu of the INSTALLATIONmenu and
select:
YNone if you have no digital source connected,
Y EXT1,EXT2 or EXT3 if you have connected your equipment to a
euroconnector,
Y FRONT in case you connected to the right side of the TV.
Press the MENUkey to switch off all menus.
Note:the low quality of some digital picture material may be the cause of digital
image distortion.In this case select Ecounder the SMARTPICTURE a key on the
remote control as this setting is intended to improve distorted picture quality.
L
Headphone
&Insert the plug into the headphone socket Lat the right side of the TV.
éPress ?on the remote control to switch off the internal loudspeakers
of the TV.
The headphone impedance must be between 8 and 4000 Ohm.
The headphone socket has a 3.5 mm jack.
In the SOUND menu select Headphone volume to adjust the headphone
volume. See p. 11.
2424Connect Peripheral Equipment |
ACEC
