Connecting peripheral equipment
The television has 2 external sockets situated at the back of the set (EXT1 and EXT2).
The EXT1 socket has audio,CVBS/RGB inputs and audio,CVBS outputs.
The EXT2 socket has audio,CVBS/S-VHS inputs and audio,CVBS outputs.
Video recorderCarry out the connections shown opposite, using a good quality
euroconnector cable.
If your video recorder does not have a euroconnector socket,the only
CABLEconnection possible is via the aerial cable.You will therefore need to
tune in your video recorder's test signal and assign it programme
EXT 2number 0 (refer to manual store,p.5).
To reproduce the video recorder picture,press 0.
Video recorder with decoder
Connect the decoder to the second euroconnector socket of
the video recorder.You will then be able to record scrambled
VCRtransmissions.
Other equipmentSatellite receiver, decoder, CDV, games, etc.
Carry out the connections shown opposite.
To optimise picture quality, connect the equipment which
produces the RGB signals (digital decoder, games, etc.) to EXT1,
CABLE
and the equipment which produces the S-VHS signals (S-VHS and
Hi-8 video recorders, certain DVD drives) to EXT2 and all other
equipment to either EXT1 or EXT2.
To select connected equipment
Press the ? key to select EXT1,EXT2,S-VHS2 (S-VHS signals
from the EXT2 socket) and EXT3 for connections on the front
panel.
Most equipment (decoder,video recorder) carries out the switching
itself.
Side connectionsMake the connections as shown opposite.
With the ? key, select EXT3.
For a mono set,connect the sound signal to the AUDIO L (or AUDIO
R) input.The sound automatically comes out of the left and right
*
AUDIOspeakers of the set.
VIDEO
SYVIDEOHeadphones
Press the m key to mute the sound on the TV set (see also
sound settings, page 6).
The headphone impedance must be between 32 and 600 Ohms.
Amplifier(only available on certain versions)
To connect to a hi-fi system, use an audio connection cable and
connect the OL� and OR� outputs on the TV set to the OAUDIO
IN� OL� and OR� input on your hi-fi amplifier.
AUDIO
10 |
ACEC
