Information for users in the UK
(not applicable outside the UK)
Positioning the TVImportant
For the best results, choose a position This apparatus is fitted with an approved
where light does not fall directly on the moulded 13 AMP plug. Should it become
screen, and at some distance away from necessary to replace the mains fuse, this
radiators or other sources of heat. Leave must be replaced with a fuse of the same
a space of at least 5 cm all around the TV value as indicated on the plug.
for ventilation, making sure that curtains, 1. Remove fuse cover and fuse.
cupboards etc. cannot obstruct the air flow
through the ventilation apertures. The TV is 2. The replacement fuse must comply with
intended for use in a domestic environment BS 1362 and have the ASTA approval
only and should never be operated or stored mark. If the fuse is lost, make contact
in excessively hot or humid atmosphereswith your retailer in order to verify the
correct type.
General Points
Please take note of the section entitled 3. Refit the fuse cover. If for any reason
�TroubleshootingO at the end of this booklet.the fitted plug is not suitable for your
socket outlet, please consult your
Interferenceretailer or a qualified electrician before
proceeding with the installation.
The Department of Trade and Industry
operates a Radio Interference Investigation Connecting the aerial
Service to help TV licence holders improve The aerial should be connected to the
reception of BBC and IBA programmes socket marked : at the back of the set.An
where they are being spoilt by interference.inferior aerial is likely to result in a poor,
If your dealer cannot help, ask at a main Post perhaps unstable picture with ghost images
and lack of contrast. Make-shift loft or
Office for the booklet OHow to Improve set-top aerials are often inadequate. Your
Television and Radio Reception�.dealer will know from experience the most
suitable type for your locality. Should you
Mains connectionwish to use the set in conjunction with
Before connecting the TV to the mains, other equipment, which connects to the
check that the mains supply voltage
corresponds to the voltage printed on the aerial socket such as TV games, or a video
type plate on the rear panel of the TV. If camera it is recommended that these be
the mains voltage is different, consult your connected via a combiner unit to avoid
dealer.repeated connection and disconnection of
the aerial plug.
Fitting the stand (if provided)
Use only the stand provided with the set,
making sure that the fixings are properly
tightened. A diagram showing how to
assemble the stand is packed with the stand.
Never use a make-shift stand, or legs fixed
with woodscrews.
46 |
ACEC
